Results 151 to 160 of about 755 (176)
Some of the next articles are maybe not open access.
Study on Bearing Behaviors of Single Axially Loaded SDCM Pile
Deep Foundations and Geotechnical In Situ Testing, 2010Stiffened Deep Cement Mixed (SDCM) pile technique has provided a new approach for treating soft. soil. The main focus of this paper is the bearing behavior and capacity prediction of single SDCM pile. Static load tests data of 67 piles collected from six different districts in China are analyzed in this paper.
Xin Zhao +3 more
openaire +1 more source
Computers and Geotechnics, 2011
Abstract The new kind of reinforced Deep Cement Mixing (DCM) pile namely, Stiffened Deep Cement Mixing (SDCM) pile is introduced to mitigate the problems due to the low flexural resistance, quality control problem and unexpected failure of DCM pile. The SDCM pile consists of DCM pile reinforced with concrete core pile. Previously, the full scale pile
Panich Voottipruex +2 more
exaly +3 more sources
Abstract The new kind of reinforced Deep Cement Mixing (DCM) pile namely, Stiffened Deep Cement Mixing (SDCM) pile is introduced to mitigate the problems due to the low flexural resistance, quality control problem and unexpected failure of DCM pile. The SDCM pile consists of DCM pile reinforced with concrete core pile. Previously, the full scale pile
Panich Voottipruex +2 more
exaly +3 more sources
Performance comparison of differential GNSS, EGNOS and SDCM in different user scenarios in Finland
2016 European Navigation Conference (ENC), 2016Positioning errors of stand-alone GNSS can be reduced with different real-time augmentation approaches. For many navigation and positioning applications, Satellite-Based Augmentation System (SBAS) and Differential code-based GNSS (DGNSS) can offer substantial improvement in the positioning accuracy.
Koivula Hannu +4 more
openaire +1 more source
Abstract This study presents the results of full-scale tests and three-dimensional finite element analyses of deep cement mixing (DCM) and stiffened deep cement mixing (SDCM) columns under lateral loads and DCM and SDCM walls under deep excavation in soft clay. The DCM walls used in this study comprised one, two and three rows of DCM columns, whereas
Panich Voottipruex +2 more
exaly +2 more sources
Stiffened deep cement mixing (SDCM) pile: Laboratory investigation
2008Deep cement mixing (DCM) pile has been widely used to improve the engineering properties of soft clay layer. The DCM pile can effectively reduce settlements of full-scale embankments by studies of Bergado et al. (1999) and Lai et al. (2006) whereas the practice research work by Petchgate et al. (2003a, b; 2004) showed that DCM pile has low strength and
openaire +1 more source
SDCM-YOLO: a cross-scale, texture-aware framework for metal surface defect detection
Engineering Research ExpressAbstract Metal surface defect detection is often hampered by small defect sizes, low contrast, and strong background textures, causing conventional approaches to suffer from frequent misses and false alarms in real-world settings. To balance detection accuracy with model compactness, we develop SDCM-YOLO, an improved framework built ...
Fuqin Deng, Weibiao Chen, Lanhui Fu
openaire +1 more source
International Journal for Numerical and Analytical Methods in Geomechanics
ABSTRACTThe long‐core SDCM pile is a typical type of stiffened deep cement mixing (SDCM) pile, it could be widely exploited in coastal geotechnical engineering because of its high bearing capacity, low settlement, green, and economic advantages. The long‐core SDCM pile is constituted by a PHC pipe pile and cemented soil, the height of the PHC pipe pile
Guoliang Dai +2 more
exaly +2 more sources
ABSTRACTThe long‐core SDCM pile is a typical type of stiffened deep cement mixing (SDCM) pile, it could be widely exploited in coastal geotechnical engineering because of its high bearing capacity, low settlement, green, and economic advantages. The long‐core SDCM pile is constituted by a PHC pipe pile and cemented soil, the height of the PHC pipe pile
Guoliang Dai +2 more
exaly +2 more sources
Electrochimica Acta, 2015
Abstract 3D printing was used to realise an 8 channel measuring head that is supplying individual droplets onto a surface of interest. Each of these droplets is individually addressed using separate counter and reference electrodes and can thus be operated completely independent.
Jan Philipp Kollender +2 more
openaire +1 more source
Abstract 3D printing was used to realise an 8 channel measuring head that is supplying individual droplets onto a surface of interest. Each of these droplets is individually addressed using separate counter and reference electrodes and can thus be operated completely independent.
Jan Philipp Kollender +2 more
openaire +1 more source
Measurement: Journal of the International Measurement Confederation
Chunfai Leung +2 more
exaly +2 more sources
Chunfai Leung +2 more
exaly +2 more sources
A Perceptual Data Cleansing Model (SDCM) for Reducing the Dirty Data
2023 International Conference on Smart Computing and Application (ICSCA), 2023Mohammad Azmi Al-Madi +4 more
openaire +1 more source

