Results 131 to 140 of about 77,011 (301)
Influence of vibrations on structures [PDF]
One type of occasional structural load is a seismic load. Earthquakes and blasts are typical sources of vibrations, but vibration generated during urban tunnel construction can represent a significant problem.
Kaláb, Zdeněk
core
Abstract In practice, reinforced concrete (RC) wall‐like columns often have openings to facilitate building services, which creates stress concentrations around the opening, resulting in the weakening of their load‐carrying capacity. This study proposes innovative strengthening methods using near‐surface mounted (NSM) incorporating steel materials to ...
Ahmed Hamoda +4 more
wiley +1 more source
Abstract This study introduces an innovative approach to strengthening defected reinforced concrete (RC) columns using externally bonded stainless steel and galvanized steel plates. Unlike conventional strengthening methods, this technique replaces traditional transverse stirrups with steel sheets, providing enhanced confinement and ductility.
Ahmed Hamoda +5 more
wiley +1 more source
Flexural performance of concrete‐filled steel tubular beams with wood chip aggregate
Abstract This study investigates the flexural performance of concrete‐filled steel tubular (CFST) beams with partial replacement of aggregates by wood chips (0%–25%) through experimental and numerical analysis. This study is novel in that it experimentally and numerically investigates the flexural behavior of CFST beams with partial replacement of ...
Mizan Ahmed +6 more
wiley +1 more source
Rapid damage assessment after an earthquake is crucial for allocating and prioritizing emergency actions. Building damage due to an earthquake depends on the seismic hazard and the building’s strength.
Mahnoosh Biglari +2 more
doaj +1 more source
Abstract The use of fiber reinforced concrete (FRC) in precast tunnel segments is among the most established and representative applications of this material. Over the past two decades, numerous tunnel linings were constructed with partial or total substitution of conventional steel reinforcement by fibers, this yielding to quantifiable benefits in ...
Vladimir Rusanov +4 more
wiley +1 more source
Abstract Textile reinforced mortar (TRM) systems have emerged as an effective alternative to conventional FRP strengthening solutions due to their compatibility with concrete substrates and favorable performance under adverse environmental conditions.
Ömer Mercimek +4 more
wiley +1 more source
The importance of seismic probabilistic risk assessment has drawn considerable attention for improving the seismic safety of nuclear facilities against earthquakes that exceed the design input ground motion.
Yukihiko OKUDA +3 more
doaj +1 more source
Abstract This study evaluates the seismic performance of elevated reinforced concrete (RC) water tanks in the Elbistan region following the February 6, 2023 Kahramanmaras–Elbistan earthquakes. Field investigations, visual damage surveys, non‐destructive testing (ultrasonic pulse velocity—UPV), concrete compressive strength measurements, peak ground ...
Mustafa Eken
wiley +1 more source
Influence of natural fibers on physical, mechanical, and fire‐resistant properties of microconcrete
Abstract This study examined the influence of natural fibers on the physical, mechanical, and fire‐resistant properties of microconcrete, in comparison with conventional polypropylene fibers used in cement composites. The fibers were characterized by FTIR and TGA/DSC to assess their composition and thermal stability, and FTIR was also performed after ...
Ivanka Netinger Grubeša +5 more
wiley +1 more source

