Results 41 to 50 of about 2,826,767 (291)

Shaft resistance of bored piles in sand

open access: yesActa Geotechnica
Abstract This work proposes an analytical method for the evaluation of the shaft load–settlement behaviour for bored piles in sandy soils. Key assumption is that the pile shaft response can be described through a simple law employing the initial (elastic) stiffness and the ultimate resistance.
Cesaro R., Di Laora R., Mandolini A.
openaire   +3 more sources

Development of a Database for Drilled Shaft Foundation Testing (DSHAFT), June 2012 [PDF]

open access: yes, 2012
Drilled shafts have been used in the US for more than 100 years in bridges and buildings as a deep foundation alternative. For many of these applications, the drilled shafts were designed using the Working Stress Design (WSD) approach.

core  

Intracrystalline Void‐Mediated Toughening of Brittle Crystals in Quail Eggshells

open access: yesAdvanced Functional Materials, EarlyView.
In quail eggshells, the high density and disordered arrangement of intracrystalline voids inhibit lattice cleavage, suppress long‐range crack propagation, and promote deformation twinning and quasi‐plasticity, serving as an essential toughening motif. We show that these voids remain within a narrow subcritical size range and therefore predominantly do ...
Jingxiao Zhong   +16 more
wiley   +1 more source

Performance of Screw Piles Under Axial Loading

open access: yesGeotechnics
Piles with continuous helix (referred to herein as “screw pile”) is a new configuration of helical piles. It features a continuous helix spiraling several pitches around a smooth shaft forming a “threaded shaft”.
Ahmed Mneina   +2 more
doaj   +1 more source

Measurement of Additional Strains in Shaft Lining Using Differential Resistance Sensing Technology

open access: yesInternational Journal of Distributed Sensor Networks, 2013
As is well known, shaft lining fracture is the main disaster resulting in a large amount of fatalities and property loss. Thus, the additional strain is a key parameter to evaluate the safety condition of existing shaft linings. In this study, a new type
Guangsi Zhao, HuaFu Pei, Hengchang Liang
doaj   +1 more source

An Experimental Study on Estimation of the Lateral Earth Pressure Coefficient (K) from Shaft Friction Resistance of Model Piles under Axial Load

open access: yesApplied Sciences, 2023
Estimating a pile shaft’s frictional capacity is challenging and has been a controversial subject among researchers. In this study, the shaft friction resistance of non-displacement (pre-installed) model piles under axial load was investigated.
Huseyin Suha Aksoy   +4 more
doaj   +1 more source

Parameter Investigation for Stamp Manufacturing of Complex 3D Geometries Using Nanoimprint Lithography

open access: yesAdvanced Materials Technologies, EarlyView.
Nanoimprint lithography can replicate complex 3D microstructures with undercuts using single‐layer polymer stamps of different elasticities. By combining experiments and simulations, T‐shaped geometries and suitable undercut radii were identified that minimize stress and defects during demolding.
Christos Julianos Karapatzakis   +3 more
wiley   +1 more source

Discussion on “Empirical methods for determining shaft bearing capacity of semi-deep foundations socketed in rocks” [J Rock Mech Geotech Eng 6 (2017) 1140–151]

open access: yesJournal of Rock Mechanics and Geotechnical Engineering, 2018
A new comprehensive set of data (n = 178) is compiled by adding a data set (n = 72) collected by Arioglu et al. (2007) to the data set (n = 106) presented in Rezazadeh and Eslami (2017).
Ergin Arioglu   +2 more
doaj   +1 more source

Nonlocomotory Robotic Strategies for Dynamic Rotation Control in Terrestrial Robots: A Review

open access: yesAdvanced Robotics Research, EarlyView.
Terrestrial robots increasingly require rapid body rotation to maintain stability and agility in complex environments. This review shows nonlocomotory rotational control strategies that operate without ground contact, including reaction wheels, tails, bars, limbs, and thrusters.
Y. Liang   +14 more
wiley   +1 more source

Gait Analysis of Pak Biawak: A Necrobot Lizard Built using the Skeleton of an Asian Water Monitor (Varanus Salvator)

open access: yesAdvanced Robotics Research, EarlyView.
Pak Biawak, a necrobot, embodies an unusual fusion of biology and robotics. Designed to repurpose natural structures after death, it challenges conventional boundaries between nature and engineering. Its movements are precise yet unsettling, raising questions about sustainability, ethics, and the untapped potential of biointegrated machines.
Leo Foulds   +2 more
wiley   +1 more source

Home - About - Disclaimer - Privacy