Results 211 to 220 of about 99,624 (259)

Shear Capacity – Crossing Borders

2017
In order to get the Eurocodes accepted, it was necessary to allow national choices with regard to parameters where no agreement between the countries involved could be reached. For the determination of the shear capacity EN1992-1-1 defines eight parameters subject to national choices (and EN1992-2 even introduces two more).
Piet Barten, Marcel ‘t Hart
openaire   +1 more source

Shear Capacity Study on Double-Nut Stud Shear Connector

Advanced Materials Research, 2012
A new stud—double-nut stud was present. The goals of the study were two fold, firstly to compare with traditional stud and secondly to search the affect factors of capacity, get calculation equations .We present an analysis of double-nut stud, include different concrete strength and different stud size.
Yang Wang, Tian Li
openaire   +1 more source

Load capacity of perforated shear connector

Pollack Periodica, 2006
Several types of economical and effective connectors are commonly used for composite steel and concrete beams at present. Perforated shear connector has been developed during last two decades and have become popular due to their advantageous properties.
Peter, CHROMIAK, Jiri, STUDNICKA
openaire   +2 more sources

Analysis of the Reinforced Masonry on Shear Capacity

Advanced Materials Research, 2013
The reinforced masonry structure system is turned up as a new group of high-rise building structure type. This paper mainly researched the shear of reinforced masonry structure under earthquake. The maximum shears of the structure are calculated in X and Y direction by numerical analysis method.
Yang Yu, Xin Jun Zhuang, Yun Feng Zhang, Zhao Qing Yuan   +3 more
openaire   +1 more source

High shear capacity ribbed piles

2012
Ribbed bored piles are known to give increased shaft capacity in comparison to conventional straight shafted bored piles. The commercial benefit of greater pile capacity is cheaper foundations. Significant environmental benefits will also accrue from the use of efficient foundations that are able to carry higher load, leading to less excavation and ...
Gorasia, R.J., McNamara, A.M.
openaire   +1 more source

Effect of Flexural Ductility on Shear Capacity

Structures Congress 2008, 2008
The seismic performance of RC bridge piers is a significant issue because the interaction of flexural ductility and shear capacity of such piers with varied amounts of lateral reinforcement is not well established. Several relationships between flexural ductility and shear capacity have been proposed by various researchers in the past.
Rachel Howser, A. Laskar, Y. L. Mo
openaire   +1 more source

Shear Capacity of Lightweight Concrete Beams

ACI Journal Proceedings, 1967
TWENTY-SIX LIGHTWEIGHT CONCRETE BEAMS WERE TESTED TO PROVIDE ADDITIONAL INFORMATION ON THE SHEAR CAPACITY OF STRUCTURAL LIGHTWEIGHT CONCRETE AND TO EVALUATE THE 1963 ACI BUILDING CODE REQUIREMENTS FOR SHEAR. THE BEAMS TESTED IN THIS PROGRAM ARE COMPARED WITH THE PRESENT SHEAR DESIGN FORMULAS AND WITH OTHER DESIGN APPROACHES THAT ARE BEING CONSIDERED AS
openaire   +1 more source

Shear-Capacity in Adhesive Glass Joints

2012
The shear-capacity of adhesive glass-joints was investigated. Various stiff and soft adhesives were tested in a short-term load-case. The tests were conducted with small specimens in order to achieve a homogenous state of stress. The results of the tests were used in order to determine the material models of the adhesives.
Fröling Maria, Persson Kent, Larsson Oskar   +2 more
openaire   +1 more source

Simple Model for Shear Capacity of Webs

Journal of Structural Engineering, 1991
The ultimate load capacity of shear webs in a plate girder is modeled as the sum of the contributions of the web and the flanges. After initial elastic buckling due to a uniformly distributed shear stress, the web provides an increasing shear resistance by virtue of a changing shear stress distribution along the boundary, in which the shear stress ...
Waflk Ajam, Cedric Marsh
openaire   +1 more source

FRP Shear Capacity Predictor

FRP Shear Capacity Predictor Software to predict the shear capacity of FRP-reinforced concrete beams using a pre-trained Artificial Neural Network (ANN) and to compare with various design code predictions. It provides a GUI for single predictions, live (interactive) predictions, and batch processing from CSV files.
openaire   +1 more source