Results 51 to 60 of about 22,337 (263)

Flexural Behavior of 3D‐Printed Porous Bouligand‐Structured Polymers: Influence of Pitch Angle and Porosity

open access: yesAdvanced Engineering Materials, EarlyView.
This study examines how helicoidal architectures with different porosities respond to bending. Adjusting layer angle and spacing in 3D‐printed polymers reveals clear tradeoffs between stiffness, strength, and energy absorption. Experiments and simulations highlight designs that distribute stress effectively, offering pathways for optimizing lightweight
Praveenkumar Subhash Patil   +2 more
wiley   +1 more source

Effects of Member Size, Shear Span-to-Depth Ratio, and Longitudinal Reinforcement Type on the Shear Behavior of Lightweight Concrete Beams: A Numerical Study

open access: yesBuildings
The shear response of lightweight concrete beams depends on the member size, shear span-to-depth ratio, and longitudinal reinforcement type. Based on checks against two previously reported LC60 beam tests and three-dimensional nonlinear finite element ...
Jiaming Zhang   +3 more
doaj   +1 more source

Affecting the Properties of Copper–Graphene Electroconductive Composite by Severe Plastic Deformation

open access: yesAdvanced Engineering Materials, EarlyView.
Copper‐based composites enhanced with carbon feature convenient mechanical properties and favorable electric conductivity. Processing via deformation and thermomechanical treatments can introduce advantageous microstructures further enhancing their performance. Herein, copper–graphene powder‐based composites are directly consolidated via rotary swaging
Radim Kocich   +3 more
wiley   +1 more source

Evaluation of Shear Strength of Concrete Flat Plates Reinforced with GFRP Plates

open access: yesInternational Journal of Polymer Science, 2017
The shear performance of concrete flat plates with glass fiber-reinforced polymer (GFRP) plate shear reinforcement was investigated through punching shear tests.
Min Sook Kim, Young Hak Lee
doaj   +1 more source

Distinct Microstructural Characteristic Lengths Defining Notch Fatigue Crack Initiation and Propagation, and Defect Tolerance in Advanced Steels

open access: yesAdvanced Engineering Materials, EarlyView.
Schematic representation of modes of microcrack nucleation, growth and temporary arrestment at different boundaries, with the criteria for crack propagation in three scenarios: (1) large notch, (2) defect/small sharp notch, and (3) long crack. This work revisits and integrates results on the fatigue behavior of advanced bainitic steels (in particular ...
Lucia Morales‐Rivas
wiley   +1 more source

Contribution of Transverse Reinforcement Configuration on Concrete Shear Capacity of RC Column

open access: yesAceh International Journal of Science and Technology, 2020
Proper design of transverse reinforcement in the RC column is needed to maintain its ability to deform under axial and shear load safely. Even though mandatory building codes for transverse support of the RC column exist, shear failure was still found in
Taufiq Saidi   +3 more
doaj   +1 more source

Finite element investigation of the shear performance of corroded RC deep beams without shear reinforcement

open access: yesCase Studies in Construction Materials, 2021
The shear behavior of reinforced concrete (RC) beams has been the principal subject of research studies. However, the structural behavior of RC deep beam without shear reinforcement is still complex and not well-understood.
Trung Kien Nguyen, Ngoc Tan Nguyen
doaj   +1 more source

High‐Entropy Alloy Interlayers Toward Advanced Joining for High‐Performance Structural Applications: Current Progress and Emerging Challenges

open access: yesAdvanced Engineering Materials, EarlyView.
HEA interlayers offer a versatile route for joining high‐performance structural materials. Their compositional and structural design regulates interfacial reactions, suppresses brittle IMCs, and improves metallurgical bonding. Sandwich interlayers further integrate defect healing with precipitation strengthening, enabling improved strength–ductility ...
Lin Yuan   +4 more
wiley   +1 more source

Punching strength of flat slabs with and without shear reinforcement

open access: yesGrađevinar, 2015
The punching shear strength is an extremely significant parameter for the design of flat slabs, i.e. the slabs supported directly on columns, without beams between columns.
Marko Bartolac   +2 more
doaj   +1 more source

Enhancement of the Through‐Thickness Electrical Conductivity of Carbon‐Fiber‐Reinforced Plastics Using Large Graphite Particles

open access: yesAdvanced Engineering Materials, EarlyView.
To enhance through‐thickness conductivity without sacrificing impregnation, large spherical graphite particles are intentionally employed in a low‐viscosity resin. Unlike finer conductive fillers, these particles remain outside the fiber bundles and accumulate in resin‐rich interlaminar regions during molding.
Keito Hosoe   +6 more
wiley   +1 more source

Home - About - Disclaimer - Privacy