Results 161 to 170 of about 592,847 (241)

Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage

steel research international, EarlyView.
This study develops alloy concepts for ultraheavy steel plates (>100 mm) with ≥690 MPa yield strength. Through dilatometry and Jominy testing, the effects of Mo, Ni, and B on hardenability are quantified. A synergy between 0.5% Mo and 0.5%–1.0% Ni ensures core strength at low cooling rates, while boron microalloying suppresses ferrite and promotes ...
Xabier Azpeitia, Unai Mayo, Nerea Isasti, Eric Detemple, Hardy Mohrbacher, Pello Uranga   +5 more
wiley   +1 more source

HWTS 50 Tool Steel Tailored for Laser Powder Bed Fusion: Sliding Wear of Bare Surfaces and Nitriding Response in Comparison with 18Ni300 and AISI H13

steel research international, EarlyView.
This work investigates the wear resistance and nitriding behavior of PBF‐LB/M‐processed Osprey HWTS 50, a lean hot work tool steel. Three heat treatment conditions are compared to conventional wrought H13, H11, and PBF‐LB/M 18Ni300. The study highlights HWTS 50's enhanced nitrogen diffusion, deeper nitriding hardness depth, and comparable or improved ...
Jonathan Hann, Giorgia Lupi, Sylvain Dossin, Riccardo Casati, Mandanà Moshiri, Arne Röttger, Faraz Deirmina   +6 more
wiley   +1 more source

Silicon carbide

Materials Today, 2004
openaire   +1 more source

Toward the Application of Multiaxial Failure Criteria: Mean Stress Sensitivity of Carbide‐Rich, High‐Alloy PM‐HIP Tool Steels Under Axial and Torsional Cyclic Loading

steel research international, EarlyView.
This study quantifies axial and torsional long‐life fatigue (LLF) behavior of three carbide‐rich PM‐HIP tool steels, correlating LLF strength with intrinsic defect size and cleanliness, thereby extracting material‐specific mean stress sensitivities and Haigh diagrams.
Lennart Mirko Scholl, Frederik Tegeder, Tobias Hajeck, Alexander Bezold, Christoph Broeckmann   +4 more
wiley   +1 more source

Sequential Reduction of Chromite Pellets Using Hydrogen and Silicon Carbide for Carbon Emission Abatement During Ferrochrome Production

steel research international, EarlyView.
H2 prereduction selectively metallizes Fe in UG2 chromite pellets at 1100°C, while silicon carbide becomes active at 1300°C to convert remaining Cr2O3 to carbides and promote Cr metallization. By separating the roles of H2 and SiC, the sequential route reaches up to 65.7% Cr metallization and suppresses in‐furnace CO generation by ≈75% versus ...
D. Coertzen, M. Tangstad, J. P. Beukes, P. G. van Zyl, D. G. Bessarabov, S. P. du Preez   +5 more
wiley   +1 more source

Analyses of the Deformability and Chemistry of Non‐Metallic Inclusions in QT Steels With Increased Recycling‐Induced Tramp Element Content

steel research international, EarlyView.
This work uses high‐temperature dilatometry to examine how the tramp elements Cu, Ni, and Sn affect the deformability of non‐metallic inclusions and matrix in quench‐and‐temper steel. Mg‐bearing inclusions deform less than Mg‐free ones. Copper lowers formability. Nickel increases deformability.
Julian Cejka, Isabell Gruber, Gerald Klösch, Susanne Katharina Michelic   +3 more
wiley   +1 more source

Crash Behavior of DP800–DP1000 Advanced High‐Strength Steel’s Dissimilar Resistance Spot Welded Joints Under Quasi‐static and High Strain Rates

steel research international, EarlyView.
The high‐strain‐rate behavior of resistance spot‐welded DP800–DP1000 joints is investigated. Results show that microstructural gradients across BM–HAZ–FZ govern hardness, strain rate sensitivity, and failure modes. While strength increases with strain rate, energy absorption is controlled by ductility, with DP800–DP800 joints showing superior ...
Pankaj Shrivastava, Velaphi Msomi
wiley   +1 more source

Influence of Surface Roughness and Temperature on Niobium Cathodic Cage Duplex Treatment Applied to VP20TS Steel

steel research international, EarlyView.
Niobium cathodic cage duplex treatment is applied to VP20TS steel to evaluate the influence of surface roughness and temperature on coating performance. Results show that higher temperatures promote thicker nitride layers and increased microhardness, while finer surface preparation enhances adhesion and wear resistance, revealing optimal conditions for
Alan Bruno Costa Cardoso, Ediones Maciel de Sousa, João Rodrigues de Barros Neto, Leandro Almeida Silva, Luciana Sgarbi Rossino, Rômulo Ribeiro Magalhães de Sousa, Marcos Guilherme Carvalho Braulio Barbosa   +6 more
wiley   +1 more source

Characterization of Nonmetallic Inclusions in Ce‐Containing Steels at the Submicroscopic Level

steel research international, EarlyView.
Accurate detection of nonmetallic inclusions (NMIs) is crucial for ensuring high standards in steel cleanness and properties. Optimized automated SEM/EDS measurements are required for evaluating Ce‐containing NMIs. This study enhances the characterization of submicroscopic NMI in Ce‐alloyed ultralow‐carbon, high‐manganese, and electrical steels ...
Kathrin Thiele, Robert Musi
wiley   +1 more source

Silicon carbide

III-Vs Review, 2005
openaire   +1 more source