Results 81 to 90 of about 2,384 (206)
CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN
Литьë и металлургия, 2010 It is shown that the way of centrifugal casting into water-cooled mould with vertical rotation axis enables to receive hollow slugs with diameter 100–250 mm, with height under 200 mm with wall thickness under 15 mm of antifriction silumin АК15М3, which will replace expensive antifriction bronze.
V. Ju. Stetsenko +2 more
openaire +1 more source
Deformation Inhomogeneities of a Hypoeutectic Aluminum-Silicon Alloy Modified by Electron Beam Treatment. [PDF]
Materials (Basel), 2023 Ustinov A +7 more
europepmc +1 more source
Studies of High Tension Silumins
The Journal of the Japan Institute of Metals, 1939 New high tension Silumins were investigated by properly adding several elements, such as Mg, Mn, Cu, Cd, Cr, Sn, Sb, Zn, and Fe in Al-Si alloys, and tested mechanical and anti-corrosion properties on 45 kinds of these alloys. As the base alloy, Al-Si-Mg alloy was taken because Mg is the indispensable element for precipitation hardening effect. Al-Si-Mg
openaire +2 more sources
Some considerations on the machinability of silumin
Journal of Japan Institute of Light Metals, 1969 As described in the previous report, it was found that silumin has a considerably high cutting resistance which gives fairly great wear of tools; and good cutting finish surface cannot easily be obtained. It was also found that improvement of its machinability was considerably effective by the addition of small amounts of sodium, calcium, etc., but was
Shigeo ZAIMA, Masaji IIO, Tatsuo SUZUKI
openaire +2 more sources
Contactless measurement of surface temperatures in mechanical engineering [PDF]
, 2009 Diplomová práce je zaměřena na teorii bezdotykového měření povrchových teplot pomocí termovizní kamery Flir SC2000 a na principy na jejichž základě kamera zpracovává sledovaný obraz.
Gorčica, Jakub
core
Determination of Saturation Conditions of the Aluminum Metal Matrix Composites Reinforced with Al2O3 Sinter. [PDF]
Materials (Basel), 2023 Szymański P +4 more
europepmc +1 more source
Coating deposition tizrcu on hyperuetectic silumin by ion-plasma method [PDF]
, 2017 In this article hyptreutectic silumin has been studied. The content of silicon is 20-22 wt.%. TiZrCu has been repositioned on this alloy. His thickness is 1 micron.
Петрикова, Е. А. +2 more
core
The Use of the Aluminium Alloy in the Bicycle Industry [PDF]
, 2009 Bakaláská práce pojednává o slitinách hliníku v cyklistickém prmyslu. Obsahuje informace o vlastnostech hliníku a jeho slitinách a rozdlení slitin hliníku dle uritých kritérií.
Hudec, Jiří
core
On the Change of various Properties of some Aluminum Alloys due to abnormal Pressure [PDF]
, 1950 Takuichi Morinaga, Masao Yamada: On the Change of various Properties of some Aluminum Alloys due to abnormal Pressure.Although a number of researchers have studied the various properties of the cast aluminum alloys at normal state, little attention has ...
山田 正夫, 森永 卓一
core +1 more source
Fullerene Black: Structure, Properties and Possible Applications [PDF]
, 2012 This review concerns the fullerene black, a poorly known nano-sized carbon material, the insoluble recidue after extraction of fullerenes from fullerene soot produced by arc evaporation of carbon material (usually graphite) in a helium atmosphere.
Kushch, S.D., Kuyunko, N.S.
core