Results 101 to 110 of about 12,398 (227)
Augmentation of Mechanical Properties of Sisal Fiber Concrete
International Journal of Engineering & Technology, 2018 The properties of sisal fiber concrete were examined in this investigation. To find out the mechanical properties such as compressive strength, flexural strength, tensile strength was carried out for the control concretes. The similar mix proportion which was utilized to cast control concrete was used to cast sisal fiber concrete were considered and ...
M Balasubramanian +2 more
openaire +2 more sources
Experiment Study: Sisal Fiber Reinforced Concrete
, 2023 One of the main fields of research that is becoming more and more relevant is fibre reinforced concrete. Fibers are used to enhance the tensile qualities of concrete without reducing its compressive strength. This study attempted to examine the impact of natural sisal fibre on concrete by partially substituting cement.
Vishwanath Kumbhar, Sandip Nirmal
openaire +2 more sources
Long Jute Fiber‐Reinforced Polypropylene Composites for Lightweight Automotive Structures
SPE Polymers, Volume 7, Issue 2, April 2026.LFT‐G processing route and the resulting property changes. ABSTRACT This study investigates the effects of long jute (LJ) fiber reinforcement on the mechanical, thermal and sound transmission loss (STL) properties of polypropylene (PP)‐based biocomposites. Long fiber thermoplastics (LFT) are increasingly used in various industries, including automotive
Tugce Uysalman +5 more
wiley +1 more source
Effect of Chemically Modified Banana Fibers on the Mechanical Properties of Poly-Dimethyl-Siloxane-Based Composites [PDF]
, 2019 The study presents the mechanical properties of polymer-based composites reinforced with chemically modified banana fibers, by alkalization in different concentrations of sodium hydroxide (NaOH).
ABADE-ABUGRE, Miriam +9 more
core
Results in MaterialsThe plant-based fibers are more preferred in engineering application over synthetic fibers because of their biodegradability, low cost, environmental friendliness and high availability. However, the physio-mechanical properties of fibers from plants vary
Yadesa Tadese, Dame Ayane, Hirpa G. Lemu
doaj +1 more source
Use of textile fibres in the reinforcement of a gypsum-cork based composite material [PDF]
, 2013 The study presented herein focus on the analysis of a series of experimental tests aiming at characterizing the performance of distinct textile fibers acting as a reinforcement of a gypsum-cork composite material.
Camões, Aires +5 more
core
Fabrication of Decorative Fluorescent Composite Material [PDF]
, 2011 Decorative Composites are the composite materials having artistic characteristics in addition to functional characteristics. It is highly possible that the decorative composites may produce an entire new field on the fibrous composite industry.
Mahato, Subham
core +3 more sources
Nonwoven Sisal Fiber as Thermal Insulator Material
Journal of Natural Fibers, 2009 The present study describes experiments carried out to analyze the effects of superficial treatment on the thermal performance of needlepunched nonwoven sisal fiber used as thermal insulation material. Nonwovens with gramature 1300–1400 g/m2 “in natura” and treated (2% w/w sodium hydroxide) were used to the thermal insulation of a tube of steel ...
Dorivalda Santos Medeiros Neira +1 more
openaire +1 more source
Study on Tensile Properties of Sisal Reinforced Activated Magnesia Oxide Carbonized Raw Soil Blocks
Advances in Materials Science and EngineeringTo investigate the toughening mechanisms and key influencing factors of sisal fiber reinforcement in activated magnesia oxide carbonized raw soil materials, splitting tensile and compressive tests were conducted on blocks of activated magnesia oxide ...
Henian Zhang, Yanqi Cheng, Peisheng Xi
doaj +1 more source
Processing and properties of natural fibers reinforced thermoplastic and thermosseting composites [PDF]
, 2013 In this work, three different natural fibers were studied and characterized, using optical and SEM microscopy. Woven fabrics of those reinforcement fibers were used to reinforce polyester and epoxy matrices and produce composite plates by vacum lay-up ...
Castro, B. F. +3 more
core