Results 1 to 10 of about 565 (142)
The effect of testing environment on small punch creep
Ubiquity Proceedings, 2018 Small punch creep testing (SPCT) is currently experiencing a resurgence of interest as a small-scale testing technique (SSTT) for a wide range of uses, including testing in-service components and materials with limited availability.
H. Dawson +3 more
doaj +3 more sources
Considerations for the accreditation of small punch creep testing
Ubiquity Proceedings, 2018 Efforts to extend a pre-existing European Code of Practice (CoP) covering small punch creep and tensile testing into a full International standard procedure are progressing.
A.J. Jones, M.R. Bache
doaj +3 more sources
Creep life analysis by an energy model of small punch creep test
Materials and Design, 2016 Abstract Currently most creep life prediction methods by small punch test are focused on the steady creep deformation phase which is similar to conventional uniaxial creep tests. This paper presents a novel creep life extrapolation approach by small punch creep test. An energy model believed to have advantages in modeling creep deformation process of
Xiang Ling
exaly +2 more sources
Correlation Factor Study of Small Punch Creep Test and Its Life Prediction [PDF]
Materials, 2016 Kaishû Guan
exaly +2 more sources
Assessment of Creep Behavior of Inconel 617 Alloy Weldment by Small Punch Test [PDF]
한국정밀공학회지, 2023 In this research, the small punch (SP) test was applied to examine the local creep characteristics of a narrow gap weldment. To find the local creep property, an Ni-based 617 alloy and its narrow gap weldment.
Bum Joon Kim
doaj +1 more source
Assessment of Creep Properties Using Small Punch Test for a 9%Cr-Mo-Co-B Power Plant Steel
Metals, 2021 The present study provides a feasible method to evaluate creep properties for a 9%Cr-Mo-Co-B power plant steel by comparing two sets of data obtained from small punch tests and conventional uniaxial creep tests.
Xiao Tian +5 more
doaj +1 more source
A Numerical and Experimental Assessment of the Small Punch Creep Test for 316L(N) Stainless Steels
Metals, 2021 This paper presents a finite element analysis of the small punch creep test for 316L(N), which is compared with experimental data for 650 and 700 °C. Special emphasis is placed on (i) assessing the influence of friction and (ii) comparing two different ...
Karl-Fredrik Nilsson +3 more
doaj +1 more source
Interpretation of non-conventional miniaturized creep test: derivation of equivalent gauge length
Journal of Materials Research and Technology, 2023 The objective of this paper is to clarify the nature of the equivalent gauge length of miniaturized creep test methods. A mechanics-based approach was employed to allow conventional uniaxial creep data to be obtained from non-conventional miniaturized ...
Wei Sun +6 more
doaj +1 more source
Metals, 2023 The creep behaviour of as-built additive-manufactured Ti-6Al-4V alloy was studied through small punch creep test (SPCT) experiments at 450 and 500 °C. The couple stress/minimum strain rate deduced from these tests made it possible to draw a Norton plot ...
Mathieu Lalé +2 more
doaj +1 more source
Results in Optics, 2022 In this study, the effect of IN713 coating applied by the laser cladding method on the creep behavior of GTD-111 superalloy by a small punch creep test was investigated.
Morteza Taheri
doaj +1 more source