Results 141 to 150 of about 1,430,293 (295)

Conductive Tin Oxide Under the Thermal Budget of Perovskite/TOPCon Tandems: Toward Indium‐Free Contacts

Advanced Materials Technologies, EarlyView.
This work demonstrates that achieving conductive undoped SnOx contacts required careful tailoring of oxygen vacancy (VO) tuning and defect engineering. Controlling oxygen deposition pressure and low‐temperature annealing (300°C) optimizes defect stoichiometry and mitigates carrier scattering. This low thermal budget approach significantly enhances Hall
Paul Llontop, Mario Hanser, Matthew Wright, Soumyajit Maitra, Eloy J. Marcelis, Jana‐Isabelle Polzin, Martin Bivour, David C. Grinter, Pilar Ferrer, Iris C. G. van den Bosch, Christoph Baeumer, Ruy S. Bonilla, Armin Richter, Monica Morales‐Masis   +13 more
wiley   +1 more source

Optimization of Fixed and Seasonal Tilt Angles for Photovoltaic Systems under Clear-Sky Conditions

Kurdistan Journal of Applied Research
This study investigates the optimal fixed and seasonal tilt angles for photovoltaic systems in Sulaymaniyah, Iraq, under clear-sky conditions. A mathematical model based on solar geometry was developed to estimate annual solar irradiation, and the ...
Shivan Shkur Mahmood, Alaa M. Abdulrahman, Ghamgeen I. Rashed   +2 more
doaj   +1 more source

Kinetics of the photolysis of pyridaben and its main photoproduct in aqueous environments under simulated solar irradiation. [PDF]

RSC Adv, 2022
Pan M, Mu S, Li Y, Yang Y, Zhang Y, Chen L, Hu D.   +6 more
europepmc   +1 more source

Direct Illuminated Rock-Bed Heat Storage a Potential Component of a Solar Thermal System for Food Preservation and Space Heating in Rural Areas of Mozambique

, 2015
Sun drying is a well known method of food preservation in countries with high level of solar irradiation and one of the ancient applications of solar energy. This method is widely applied for drying different agricultural products, meat and fish in rural
Boaventura C. Cuamba, Nydal, Ole J.,, Jorgen Lovseth, Lovseth, Jorgen,, A. Veremachi, Ole J. Nydal, Cuamba, Boaventura C.,, Azer Zia, Veremachi, Amos,, Zia, Azer,   +9 more
core   +1 more source

Processing‐Driven Engineering of Transparent Conductive In‐Zn‐O Thin Films: A Comparative Study of Spin‐Coating, Inkjet Printing, and Screen Printing

Advanced Materials Technologies, EarlyView.
Transparent, electrically conductive In–Zn–O thin films are solution‐processed by spin coating, inkjet printing, and, as demonstrated here for the first time, screen printing. The chosen deposition technique determines the solution composition, which in turn governs the resulting microstructure and optoelectronic performance.
Danjela Kuscer, Izabela Čurković, Brigita Kmet, Aleksander Matavž   +3 more
wiley   +1 more source

Demarcation of suitable site for solar photovoltaic power plant installation in Bangladesh using geospatial techniques

Next Energy
The major goal of this research is to adopt analytical hierarchy process (AHP) based geospatial technique to select suitable zone for the solar photovoltaic (PV) power plants.
M.M. Shah Porun Rana, Md. Moniruzzaman
doaj   +1 more source

Advanced Photonic Thin Films for Solar Irradiation Tuneability Oriented to Greenhouse Applications. [PDF]

Materials (Basel), 2021
Sánchez-Lanuza MB, Menéndez-Velázquez A, Peñas-Sanjuan A, Navas-Martos FJ, Lillo-Bravo I, Delgado-Sánchez JM.   +5 more
europepmc   +1 more source

Solar Energy Research Institute Report 271-2728

, 1985
Bibliography, divided by topic, listing general publications on photovoltaic stand-alone applications prepared by the Technical Information Branch at the Solar Energy Research Institute (SERI) for the U.S.
Solar Energy Research Institute. Technical Information Branch
core  

Electric‐Field‐Assisted Spin Coating: A New Process for Adjusting Crystallization of Perovskite Thin Films

Advanced Materials Technologies, EarlyView.
Electric‐field‐assisted spin coating is introduced as a wet‐film processing route for guiding perovskite crystallization. A transient perpendicular field produces distinct structural maxima rather than monotonic grain growth: largest scanning electron microscopy (SEM)‐derived grain size at nominal 2 kV cm−1${\rm cm}^{-1}$, largest X‐ray diffraction ...
James R. Zelaya, Gary C. Tepper
wiley   +1 more source

3D Printing of Self‐Healing Polymers by Material Extrusion: A Process‐Centric Review of Setups, Parameters, and Applications

Advanced Robotics Research, EarlyView.
This review highlights recent advances in material extrusion 3D printing of self‐healing polymers, focusing on the interplay between material chemistry, rheology, hardware customization, and process optimization. Filament‐ and ink‐based extrusion strategies, multimaterial architectures, and postprocessing approaches are discussed for applications in ...
Antonio Pavone, Gianni Stano, Gianluca Percoco   +2 more
wiley   +1 more source