Results 271 to 280 of about 1,541,068 (336)
Some of the next articles are maybe not open access.

The Location of Spent Fuel Pins in Heavy Water Research Reactor in the Spent Fuel Pool

Volume 9: Decontamination and Decommissioning, Radiation Protection, and Waste Management, 2022
Heavy Water Research Reactor was the first reactor in China. It adopted metallic uranium as fuel and aluminum alloy as cladding in the beginning. During the refueling procedure many years ago, several fuel pins dropped at the bottom of the spent fuel ...
Jin Lu   +6 more
semanticscholar   +2 more sources

Study on spent fuel heatup during spent fuel pool complete loss of coolant accident

Kerntechnik
After years of operation, nuclear power plants accumulate a substantial amount of spent fuel stored in spent fuel pools. Prior to the completion of dry storage facilities, this spent fuel remains in the spent fuel pools for several decades.
Yu-Huai Shih
semanticscholar   +2 more sources

Decay heat calculation for spent fuel pool application

Journal of Energy - Energija, 2022
The automatic procedure was developed for fuel assembly decay heat calculation based on PARCS 3D burnup calculation for fuel cycle depletion, and ORIGEN 2.1 calculation during both depletion and fuel cooling. Using appropriate pre-processor and post-processor codes it is possible to calculate fuel assembly decay heat loads for all fuel assemblies ...
Grgić, Davor   +2 more
openaire   +1 more source

Study On the Step by Step Process and Performance of Laser Welding for the Spent Fuel Pool Floor

Journal of Nuclear Engineering and Radiation Science, 2023
In order to realize the steel liner underwater repairing of the spent fuel pool of the third generation nuclear power plant, the laser welding process tests were carried out step by step in three environments: air, shallow water and simulating ...
Le Mei   +6 more
semanticscholar   +1 more source

Optimization of Fuel Storage in Spent Fuel Pool

Volume 9: Student Paper Competition, 2018
This paper is the optimization of fuel assembly placement in the spent fuel pool according to the categorized rules. Only some specifically reactivity class assemblies could put together as the pattern. The allowable patterns, the number of the fuel assembly for each reactivity class and the number of RCCAs are from the nuclear power plant technique ...
Xinyu Wang   +2 more
openaire   +1 more source

Novel Eddy Current Array Sensor Delivery Tool for Automated Nondestructive Examination of Spent Fuel Pool Liner

Journal of Nuclear Engineering and Radiation Science, 2022
Inspection of a spent fuel pool (SFP) liner of a nuclear power plant is important to validate the integrity of this component to perform its intended function (e.g., confirm that there are not any defects in the pool liner).
Michael Smith   +3 more
semanticscholar   +1 more source

Coupling of ASTEC V2.1 and RASCAL 4.3 Codes to Evaluate the Source Term and the Radiological Consequences of a Loss-of-Cooling Accident at a Spent Fuel Pool

Journal of Nuclear Engineering and Radiation Science, 2022
This paper deals with a general methodology to evaluate the Source Term (ST) and the Radiological Consequences (RC) of a hypothetical Severe Accident at a Fukushima-like Spent Fuel Pool by coupling ASTEC 2.1 and RASCAL 4.3 severe accident and ...
A. Guglielmelli   +4 more
semanticscholar   +1 more source

Spent Fuel Behavior in Water Pools

CORROSION 1981, 1981
abstract This paper deals with the major question, "How long can the integrity of water-cooled reactor spent fuel cladding be maintained while the fuel is stored in water?" Evidence to date (1980) from the United States and other countries on spent fuel with Zircaloy and stainless steel cladding is described.
W. J. Bailey   +3 more
openaire   +1 more source

Welding defect detection in nuclear power plant spent fuel pool panels based on alternating current field measurement: experimental and finite element analysis

Insight - Non-Destructive Testing and Condition Monitoring, 2022
The overlay panels of spent fuel pools of nuclear power plants can easily become corroded and produce micro-crack defects. Surface crack defects tend to expand vertically, horizontally and obliquely, causing damage and fracture to the overlay panels and ...
Zhaoming Zhou   +4 more
semanticscholar   +1 more source

Home - About - Disclaimer - Privacy