Results 201 to 210 of about 60,563 (256)

Ti3C2Tx MXene/Silver Composite Foams For Lightweight, High‐Performance Electromagnetic Interference Shielding and Joule Heating

Advanced Materials Interfaces, EarlyView.
Ultrathin MXene/EMF composite foams achieve a specific shielding efficiency of 749.6 dB.dB·cm3$\mathrm{dB}\cdot {\mathrm{cm}}^{3}$/g, while the silver‐enhanced MXene/Ag/EMF reaches 81.4 dB shielding effectiveness at just 1.0 mm thickness. Both composites exhibit rapid Joule heating, retain stability up to 250∘C$^\circ{\rm C}$, and withstand 1000 ...
Abdullah A. Mahmood, Mingxuan Li, Vahid Rad, Mehdi Zarei, Chen‐Yu Yeh, Masoud Soroush, Guangyong Li, Paul W. Leu   +7 more
wiley   +1 more source

Smart and Sustainable Sizing: Investigating the Sensing Behavior of Glass Fabrics Coated With Waterborne Polyurethane/Graphene Dispersions

Advanced Materials Technologies, EarlyView.
Waterborne polyurethane/graphene formulations are developed as piezoresistive coatings on glass fabric to enable flexible strain sensing. The graphene‐enabled conductive network provides a stable electromechanical response under cyclic compression. The coating demonstrates reliable pressure‐dependent resistance changes, highlighting its potential for ...
Vishnu Vijayan Pillai, Premika Govindaraj, Sai Aditya Pradeep, Olivia Sequerth, Srikanth Pilla, Franz Konstantin Fuss, Peter Kingshott, Nishar Hameed, Nisa V Salim   +8 more
wiley   +1 more source

End‐to‐End Sensing Systems for Breast Cancer: From Wearables for Early Detection to Lab‐Based Diagnosis Chips

Advanced Materials Technologies, EarlyView.
This review explores advances in wearable and lab‐on‐chip technologies for breast cancer detection. Covering tactile, thermal, ultrasound, microwave, electrical impedance tomography, electrochemical, microelectromechanical, and optical systems, it highlights innovations in flexible electronics, nanomaterials, and machine learning.
Neshika Wijewardhane, Lyn I. Jones, Richard M. Martin, Helen Winter, Faezeh Arab Hassani   +4 more
wiley   +1 more source

Characterization of Droplet Formation in Ultrasonic Spray Coating: Influence of Ink Formulation Using Phase Doppler Anemometry and Machine Learning

Advanced Materials Technologies, EarlyView.
This study explores how machine learning models, trained on small experimental datasets obtained via Phase Doppler Anemometry (PDA), can accurately predict droplet size (D32) in ultrasonic spray coating (USSC). By capturing the influence of ink complexity (solvent, polymer, nanoparticles), power, and flow rate, the model enables precise droplet control
Pieter Verding, Danny E. P. Vanpoucke, Yunus T. Aksoy, Tobias Corthouts, Maria R. Vetrano, Wim Deferme   +5 more
wiley   +1 more source

High‐Power Rapid Laser‐Induced Synthesis of Multi‐functional Cobalt Metal‐Organic Framework With an Unprecedented Synthesis Efficiency

Advanced Materials Technologies, EarlyView.
Laser‐assisted synthesis enables rapid (within 1 h) and high‐yield (≥90%) production of Co‐MOFs with mesoporous structures, tunable magnetic and optical properties, and efficient adsorption of N2, CH4, and CO2 for low‐energy gas separation. DFT calculations elucidate the electronic structure and adsorption behavior.
Saliha Mutlu, Bülend Ortaç, Ali Karatutlu, Taylan Gorkan, Engin Durgun, Dilek Soyler, Saniye Soylemez, Jelena Lillepäg, Volkan Filiz, Nergis Arsu, Sevil Savaskan Yilmaz   +10 more
wiley   +1 more source

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Advanced Materials Technologies, EarlyView.
One‐dimensional C4N2H14PbBr4 is shown to have a quasi‐direct electronic band structure and strongly anisotropic transport with polarized broadband emission. A GW/Bethe–Salpeter excited‐state force formalism, supported by polarized Raman and temperature‐dependent photoluminescence, identifies low–frequency Pb–Br phonons that drive ultrafast exciton self‐
Rijan Karkee, Rafael R. Del Grande, Yeonjoo Lee, Jinkyoung Yoo, Azza Ben‐Akacha, Biwu Ma, Michael T. Pettes, David A. Strubbe   +7 more
wiley   +1 more source

Additive‐Manufactured, Multifunctional Bioreactor Technology for Dynamic Culture of 3D Bioprinted Tissue Models

Advanced Materials Technologies, EarlyView.
We introduce an additively manufactured bioreactor with a perfusion flow system and integrated temperature and pH sensors for skeletal muscle tissue biofabrication. The bioreactor's performance was evaluated by assessing the viability, spreading of the myoblast cells in a printed scaffold, and contraction of the isolated murine musculi interossei ...
Lys Sprenger, Johann Schorzmann, Hsuan‐Heng Lu, Muhammad Osama, Julian Bauer, Michael Haug, Oliver Friedrich, Aldo R. Boccaccini, Frank Döpper, Sahar Salehi   +9 more
wiley   +1 more source

Fully 3D‐Printed Wave‐Wound Electromagnetic Motors

Advanced Materials Technologies, EarlyView.
This work presents the first fully 3D‐printed wave‐wound electromagnetic motors, which are created using conductive nanoparticle inks, carbon‐filled nylon polymers, and surface mount components. These motors can achieve a stall torque of 7.62N·mmA−1$7.62 \nobreakspace N{\cdot }mm A^{-1}$ and efficiency of 28.2 %, which approaches the performance of ...
Joseph Schwalbe, Sebastian Mettes, Eduardo Francke, Kenneth W. Allen, Yi Chen Mazumdar   +4 more
wiley   +1 more source

Buckling‐Driven Linearity in Flexible Capacitive Pressure Sensors Based on a Three‐Dimensional Dual‐Pore Polyurethane Structure

Advanced Materials Technologies, EarlyView.
A flexible pressure sensor utilizing a 3D dual‐pore polyurethane structure is developed to overcome the intrinsic trade‐off between sensitivity and linearity. By inducing sequential buckling through distinct pore sizes and shapes, the device achieves highly linear and sensitive responses across a wide pressure range.
Jae Yeong Jang, Jaemin Choi, Young Jung
wiley   +1 more source

Upcycling Compact Discs Into Ultra‐Stable, Flexible, and Stretchable Nanoporous Gold Electrodes for Enhanced Biosensing Performance

Advanced Materials Technologies, EarlyView.
This article highlights the development of robust and high‐performance flexible and stretchable biosensors that maintain long‐term functionality and optimal electrical conductivity under mechanical deformation, utilizing sustainable and cost‐effective manufacturing principles.
Mousa H. Aldosari, Ahyeon Koh
wiley   +1 more source