Results 251 to 260 of about 30,831 (294)
Highly-Conductive and Micro-Structured Transparent Glass Substrates for Efficient and Scalable Photoelectrochemical Applications. [PDF]
Adv Sci (Weinh)Lopes TDS +7 more
europepmc +1 more source
Enhancing soft robots with chemical shielding for harsh corrosive liquid environments.
Mater HorizQing H +7 more
europepmc +1 more source
Effect of the spray cone angle in the spray cooling with R134a
Experimental Thermal and Fluid Science, 2013 Spray cooling experiments were performed to study the effect of the spray cone angle on heat transfer and film thickness. The experiments were carried out for three different types of nozzles. Results for heat transfer and film thickness for different flow rates are presented working with the dielectric refrigerant R134a and on a heater with low ...
Raúl Anton +2 more
exaly +3 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Effects of the spray angle on splat morphology during thermal spraying
Surface and Coatings Technology, 1997Abstract The effects of spray angle on the morphology of thermally sprayed particles impinging on polished substrates have been studied by implementing several statistical tools (i.e., Gaussian analysis, Weibull distribution and the t -test). Nickel-based alloy (Astroloy) particles were vacuum plasma-sprayed onto copper plates at normal (i.e., 90 °)
G Montavon +2 more
exaly +2 more sources
Evaluation of off-angle thermal spray
Surface and Coatings Technology, 1997Abstract The effect of spray angle on the properties of plasma spray deposits has been investigated. Two different materials, NiAl and Cr 3 C 2 –NiCr, were sprayed at angles from 50 to 90° with respect to the substrate. The spray angle influenced the microstructure and the properties of the deposits.
Christopher C Berndt
exaly +2 more sources
Effect of spray angle on Ni particle deposition behaviour in cold spray
Surface Engineering, 2018In this work, cold sprayed Ni particles depositing onto stainless steel (SS) and aluminium substrates was studied the deposition behaviour and bonding mechanism at different spray angles. Contrary to common investigation which is limited to the cross-section or surface, the fractured contact surface on deposited particle was obtained by detaching the ...
Yingchun Xie +2 more
exaly +3 more sources
Impact of spray angle and particle velocity in cold sprayed IN718 coatings
Surface and Coatings Technology, 2023Hwee Leng Seng +2 more
exaly +2 more sources
Spray Angle and Atomization in Diesel Sprays
SAE Technical Paper Series, 1984<div class="htmlview paragraph">In this investigation, cone angles of high pressure diesel sprays emerging through plain orifices were studied. The study was conducted at constant fuel pressures by using injection system in a single pulse mode.
K. S. Varde, D. M. Popa, L. K. Varde
openaire +1 more source