Results 101 to 110 of about 691,640 (219)

Controlling Grain Growth in Powder Bed Fusion of Yttria‐Stabilized Zirconia Using Femtosecond Lasers: Challenges and Methodological Insights

Advanced Engineering Materials, EarlyView.
Binder‐free laser powder bed fusion of 8YSZ with a femtosecond laser is used to map process windows linking scan strategy, heat accumulation, and grain growth. Time‐resolved thermography and simulations reveal thermal regimes that enable continuous, vitrified, and fine‐grained 8YSZ surface layers without absorptive additives and demonstrate ...
Markus Kühn, Sarah Kaden, Andrea Barz, Daniel Störzner, Jens Bliedtner, Andrés Fabián Lasagni   +5 more
wiley   +1 more source

RECOVERY AND GROWTH PATTERNS OF COASTAL BERMUDA GRASS AS INFLUENCED BY NITROGEN LEVEL AND DEFOLIATION FREQUENCY

Annals of Tropical Research, 1986
The interrelationships among residual leaf area following defoliation, leaf area development patterns and mean crop growth rates of Coastal bermuda grass as influenced by nitrogen levels (20, 50 and 100 kg/ha/mo) and defoliation frequency (2, 4, and 8 ...
MR Villanueva, EC Holt
doaj  

Fabrication Routes for Ionic Conducting Fiber Strain Sensors

Advanced Engineering Materials, EarlyView.
Ionic conducting fiber strain sensors (ICFSs) offer compliant, textile‐integrable sensing. Thus far, the commercialization of ICFSs has been constrained by fiber fabrication routes. This review provides a fabrication‐centric analysis of ICFSs correlating processing strategies with material properties and scalability.
Leo John Kershaw, Zhanhong Yang, Anne Ladegaard Skov, Magdalena Skowyra   +3 more
wiley   +1 more source

First-Principles Study on the Interplay of Strain and State-of-Charge with Li-Ion Diffusion in the Battery Cathode Material LiCoO₂. [PDF]

ACS Appl Mater Interfaces, 2023
Zhou Z, Cazorla C, Gao B, Luong HD, Momma T, Tateyama Y.   +5 more
europepmc   +1 more source

Rapidly Solidified High‐Strength Invar 36 Prepared by Planar‐Flow Melt Spinning

Advanced Engineering Materials, EarlyView.
The Invar 36 alloy was rapidly solidified using the planar‐flow melt‐spinning technique. Ribbon samples with thicknesses ranging from 20 to 160 mm were produced. As the grain size of the ribbon decreased to sub‐micron levels, the hardness increased by more than 2 times.
Bekir Akgül, Mehmet Kul
wiley   +1 more source

Morphology, Transport, and Dynamics of Protein Adsorption in Open‐Cell Metal Foam

Advanced Engineering Materials, EarlyView.
Stainless steel (SS) open‐cell foams are shown to adsorb more protein per unit area than previously reported 316L SS and chromium oxide surfaces under static and flow conditions. An integrated approach combining 3D pore imaging, flow simulation, and protein adsorption experiments characterizes the foam’s performance.
Chinmaya Prerana Inguva, Joseph Lavoie, Afsaneh Rabiei   +2 more
wiley   +1 more source

The Methods for Estimating State of Charge in Lithium-Ion Batteries. [PDF]

Materials (Basel)
Xu P, Zhou R.
europepmc   +1 more source

Peukert's Law-Based State-of-Charge Estimation for Primary Battery Powered Sensor Nodes. [PDF]

Sensors (Basel), 2023
Dai H, Xia Y, Mao J, Xu C, Liu W, Hu S.
europepmc   +1 more source

Effects of Mg on Microstructure and Solidification of a Hypereutectic Zn–8 wt.%Al Alloy

Advanced Engineering Materials, EarlyView.
An appreciable set of results involving thermal data, microstructure, chemical composition, and microstructural growth laws is reported for ZnAlMg alloys. Such results demonstrate that ZnAlMg alloys have high potential for applications in automotive self‐lubricating components, batteries, and electrical systems.
Raí B. de Sousa, Jeverton L. Paixão, Daylla S. Silva, Bruno S. Sobral, Mucio D. de Medeiros, José E. Spinelli, Bismarck L. Silva   +6 more
wiley   +1 more source

An approach of state-of-charge prediction for lithium-ion batteries using hybrid Pyraformer-LSTM learning network. [PDF]

PLoS One
Wang X, Zhang L, Fan Q, Hu Y, Zhang J, Chen H.   +5 more
europepmc   +1 more source