Results 151 to 160 of about 584,580 (206)
Some of the next articles are maybe not open access.
Quasi-static load space qualification test
2021 IEEE 8th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2021Satellites are designed and tested to withstand to static and dynamic operative loads during the launch and the ascent phase. The validation of the structural design of the satellite is generally performed by tests and/or analysis. The paper presents the static load test methods with a focus on the sine-burst quasi-static load test.
Martina Orefice +4 more
openaire +1 more source
Static Loading Tests of Composite Beams
2021Short-term static loading tests of composite beams have been performed using a breaking machine in the Civil Engineering Faculty laboratories at the Technical University of Kosice. On the beams loaded with hydraulic presses, deflections and strains (relative deformations) in their steel and concrete regions have been measured, and the widths of cracks ...
Vincent Kvočák, Daniel Dubecký
openaire +1 more source
Static pile load test inversion
2019This paper presents an inversion scheme to estimate the load distribution along the pile shaft using data from static pile load test. The input data consist of load at the pile head and the corresponding movement. A forward model consisting of a t-z model is combined with a Genetic Algorithm (GA) in this inversion scheme.
Potty, Gopu R. +3 more
openaire +2 more sources
1993
Abstract : A series of static load experiments was conducted on the M256 gun system to determine if clearances existed between its various components and, if so, where. In particular, it was desired to ascertain whether the gun tube and recoil mechanism act as a single unit or if clearances that exist between their primary parts allow the gun tube to ...
Joe Thiravong +2 more
openaire +1 more source
Abstract : A series of static load experiments was conducted on the M256 gun system to determine if clearances existed between its various components and, if so, where. In particular, it was desired to ascertain whether the gun tube and recoil mechanism act as a single unit or if clearances that exist between their primary parts allow the gun tube to ...
Joe Thiravong +2 more
openaire +1 more source
Axial Pile Loading Test—Part 1: Static Loading
Geotechnical Testing Journal, 1985Abstract The International Society of Soil Mechanics and Foundation Engineering established a technical committee to develop manuals for field and laboratory geotechnical tests. As one of these, recommendations on axial pile loading tests are presented to the profession resulting from four years of worldwide discussion among piling ...
openaire +1 more source
Pile load transfer from static load test inversion
DFI Journal - The Journal of the Deep Foundations Institute, 2016This paper presents an inversion scheme to estimate the distribution of load in a deep foundation from the load–movement curve measured at the head. The method may be useful in situations where static load tests have been performed on test piles that are not instrumented with strain gages or telltales, or the instrumentation data are unreliable.
openaire +2 more sources
Optimum Jack Loads for Static and Fatigue Tests
Journal of Aircraft, 1995An automated procedure used at the Northrop Grumman Corporation to determine the jack loads for static and fatigue structural tests is described. The procedure includes a recently developed method to automatically compute jack loads that satisfy jack-capacity and jack-direction constraints, while providing a best fit to known internal moment, shear ...
Fred Austin +2 more
openaire +1 more source
Static Plate Loading Tests on Overconsolidated Clay
Journal of the Geotechnical Engineering Division, 1982Three in situ static plate loading tests carried out on a medium stiff, overconsolidated clay deposit are described and interpreted. In addition to the plate loading test results, the results from undrained static laboratory tests on Haga clay are also presented.
Knut H. Andersen, Per Stenhamar
openaire +1 more source
BI-DIRECTIONAL STATIC LOAD TESTING
GEO-EXPOA full-scale static load testing program can optimise many of the requirements in terms of costs and remove uncertainties. The bi-directional load testing method, by eliminating the reaction structures of the traditional top-down testing methodology, opens up unseen possibilities of the testing program in the most efficient, safe, and cost-effective ...
openaire +1 more source
Batter Pile Static Load Test and Analysis
Applied Mechanics and Materials, 2012This paper through the test results and theoretical calculation of the batter pile static load, analysis of the actual stress state of cables, and according to the test results to determine the level of the foundation soil resistance coefficient ratio and allow level a transplant.
Li Lan Zhang, Yao Dong Wu
openaire +1 more source