Influence of matrix toughness and interfacial strength on the toughness of epoxy composites with ductile steel fabric reinforcement [PDF]
, 2015 In the last decades, several studies have been performed on polymers reinforced with steel cords or wires. However, the diameter of these steel reinforcements was still quite large (200 micron and more).
Degrieck, Joris +3 more
core +2 more sources
Experimental study on flexural strength of slurry infiltrated fibrous concrete (SIFCON) produced with various percentages of waste steel fibers recovered from used tires [PDF]
E3S Web of ConferencesSlurry Infiltrated Fibrous Concrete (SIFCON), a modified version of Fiber Reinforced Concrete (FRC), addresses the challenge of increased fiber volume fractions. Commercially produced steel fibers are typically used in FRC and SIFCON.
Penda Ravi Prasad, I V Ramana Reddy
doaj +1 more source
Structural performance of steel-concrete sandwich beams with carbon nanofiber reinforcement [PDF]
, 2019 Cementitious materials such as concrete are typically characterised as quasi-brittle with low tensile strength and low strain capacity, which hence affect the long-term durability of the structure.
Ashraf S. Ayoub +19 more
core +1 more source
Interface fracture of hybrid joint of glass-/steel-fiber composite [PDF]
, 2012 DOI 10.1108/02644401211235861Purpose - In order to connect a fiberglass composite structure to a steel structure, a hybrid composite made of glass and steel fibers has been studied.
Boseman, M. F. +3 more
core +1 more source
Applied Sciences, 2017 In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated.
Quantao Liu +4 more
doaj +1 more source
Effect of Steel Fibers on the Properties of Refractory Free Cement Concrete
Journal of Engineering, 2023 Free cement refractory concrete is a type of refractory concrete with replacing alumina cement by bonding materials such as white kaolin, red kaolin and fumed silica.
Abeer Abdulqader Salih +1 more
doaj +1 more source
Highlights in Science, Engineering and Technology, 2023 Fibre concrete is a commonly improved concrete. Compared with ordinary concrete, it has more excellent characteristics and has been widely used in engineering structures and other fields. This paper describes the mechanical properties of polypropylene fibres, steel fibres, and hybrid fibres (steel fibres and polypropylene fibres); it discusses the use ...
openaire +1 more source
Mechanical behavior of entangled materials with or without cross-linked fibers [PDF]
, 2013 Entangled materials can be manufactured using fibers made from various materials, such as carbon, glass or steel. The mechanical properties of these low-density materials are linked to their architecture (fiber orientation, number of contacts, etc ...
Masse, Jean-Philippe +1 more
core +4 more sources
Shear capacity of reinforced concrete beams with recycled steel fibers
Open Engineering, 2023 This study investigates the effect of using recycled steel fibers (RSFs) extracted from cut tires with dimensions of 0.8 and 40 mm in diameter and length, respectively. Different percentages of fibers were used, which are 0.5, 1, 1.5, and 2%.
Muneam Ali K., Makki Ragheed F.
doaj +1 more source
Shear Behavior of Steel-Fiber-Reinforced Recycled Aggregate Concrete Deep Beams
Buildings, 2021 Results of an experimental investigation aimed at studying the effect of steel fibers on the shear behavior of concrete deep beams made with a 100% recycled concrete aggregate (RCA) are presented in this paper.
Nancy Kachouh +3 more
doaj +1 more source