Results 201 to 210 of about 5,336 (243)

The Stainless Steel Piston: Surgical Indications and Results

Archives of Otolaryngology - Head and Neck Surgery, 1965
In recent months much attention has centered on the use of piston-shaped prosthetic devices constructed of Teflon, steel, and Teflon-steel in surgery for clinical otosclerosis.1,2The surgical philosophy determining the use of these prostheses differs with the clinical experience of the surgeon.
openaire   +2 more sources

Holographic investigation of the expansion-control characteristics of steel inserts in pistons

Experimental Mechanics, 1991
The expansion-control characteristics of steel inserts in the open-sleeve type of diesel-engine pistons were investigated using holographic interferometry. The holographic measurements were compared with the predictions of a finite-elements model of the piston.
M. M. Ratnam, W. T. Evans
openaire   +1 more source

Evaluation of High-Temperature Martensitic Steels for Heavy-Duty Diesel Piston Applications

SAE International Journal of Advances and Current Practices in Mobility, 2022
<div class="section abstract"><div class="htmlview paragraph">Five different commercially available high-temperature martensitic steels were evaluated for use in a heavy-duty diesel engine piston application and compared to existing piston alloys 4140 and microalloyed steel 38MnSiVS5 (MAS).
Eric Gingrich, Dean Pierce, Gerald Byrd, Katherine Sebeck, Vamshi Korivi, Govindarajan Muralidharan, Hsin Wang, James Torres, Artem Trofimov, James Haynes, Michael Tess   +10 more
openaire   +1 more source

Research on Design Development and Modification of a Steel Piston in a Heavy-Duty Diesel Engine

SAE Technical Paper Series, 2023
<div class="section abstract"><div class="htmlview paragraph">The thermal and mechanical loads of the engine rise dramatically with the increase in engine power density, which places higher demands on the design of the piston. In this paper, the design development of a steel piston for a marine
Yipeng Liu, Guoxi Jing, Longfei Zhang, Mengyu Han, Weibin Zhang, Hai Liu, Zhongwei Zhang   +6 more
openaire   +1 more source

Fabrication of piston pins made of a novel aluminium-alloyed UHC steel

The International Journal of Advanced Manufacturing Technology, 2019
The vehicle industry strives for weight reduction in order to reduce fuel consumption. This leads to the development of new steel grades that are enriched with light metals, such as aluminium. In addition to the reduction in density, this means that the properties of conventional steels need to be at least replaced or ideally even surpassed.
B.-A. Behrens, A. Chugreev, M. Kazhai, D. Yarcu, C. Büdenbender, R. Relge   +5 more
openaire   +1 more source

New MAHLE steel piston and pin coating system for reduced TCO of CV engines

SAE International Journal of Commercial Vehicles, 2016
<div class="section abstract"><div class="htmlview paragraph">Total cost of ownership is requiring further improvements to piston friction reduction as well as additional gains in thermal efficiency. A piston compression height reduction in combination with carbon based piston pin coatings is enabling advancements in both demands.
Marco Maurizi, Daniel Hrdina
openaire   +1 more source

Modeling of loads and features of changing the structure of the material of the steel piston of a gas generator

MORSKIE INTELLEKTUAL`NYE TEHNOLOGII)</msg>, 2023
В работе приводится обоснование выбора материала поршня ДВС газового генератора с применением различных методов исследования. Объектом исследования выбран стальной поршень ДВС газового генератора марки JGC 624 GS-N.L производителя GE Jenbacher.
openaire   +1 more source

Cracking of High Strength Steel Piston Rod During Chrome Plating

2019
Abstract A few Cr-Mo steel piston rods from different production batches were found identically cracked in the eye end near the radius after chrome plating and baking treatment. Two of them cracked in the plating stage itself instantly broke on slight tapping. Cracking initiated from the outer base surface of the forked eye end.
A. K. Das, B. M. Thippeswamy, J. Prasad
openaire   +1 more source

Wear and Seizure of Aluminium-Silicon Piston Alloys in Reciprocating Motion against Steel

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1995
Aluminium-silicon alloy pins were dry slid in unidirectional and reciprocating sliding against steel counterfaces in a normal pressure range of 0.39–26 M Pa and a sliding speed range of 0.6–1.8 m/s. Changing the mode of sliding from unidirectional to reciprocating as well as an increase in reciprocating speed were found to affect wear and seizure ...
A Somi Reddy, K S S Murthy, S K Biswas
openaire   +1 more source

Internal Combustion Engines--Piston Rings--Steel Rectangular Rings

2017
There is no standard equivalent to this SAE Standard. However, SAE J2226 is similar to and represents an extension of SAE J1998 (equivalent to ISO Standard 6622/2 TR). This SAE Standard specifies the essential dimensional features of Type B barrel faced steel rectangular piston rings.
openaire   +2 more sources