Results 21 to 30 of about 2,181,731 (181)

Effect of Type and Distribution of Shear Studs on the Behavior of Composite Steel-Concrete Shear Walls [PDF]

Journal of Rehabilitation in Civil Engineering, 2019
In this research the in-plane shear behavior of composite steel-concrete shear walls was investigated by taking into account the following variables: steel plate thickness, the spacing between shear studs, the shape and type of the shear studs and ...
Masood Farzam, Fateme Hoseinzade
doaj   +1 more source

A Study on Steel Plate Shear Wall

IOP Conference Series: Materials Science and Engineering, 2019
Abstract The main objective of this research study was to evaluate the parameters of stiffened and unstiffened steel plate shear wall under seismic loads. The scope of effort included simulating five unstiffened steel plate shear wall with varying thickness, three singly stiffened steel plate shear wall, and three doubly stiffened steel ...
B P Annapoorna, Mohammed Ali Boodihal
openaire   +1 more source

Out-of-Plane Bending and Shear Behaviors of Steel Plate-Concrete Walls for Nuclear Power Plants

Advances in Civil Engineering, 2020
The steel plate-concrete structure, with its advantages of modular construction, good seismic capacity, and strong impact resistance, has been gradually replacing the reinforced concrete structure in the containment vessel and internal workshop structure
Zhihua Chen, Jingshu Wu, Jiadi Liu, Chenghe Hu   +3 more
doaj   +1 more source

Study on Seismic Performance and Damage Analysis of Steel Plate Shear Wall with Partially Encased Composite (PEC) Columns

Applied Sciences, 2019
A steel plate shear wall often uses partially encased composite (PEC) columns instead of edge frame columns. Such a steel plate shear wall not only bears the gravity load of the structure and resists the bending moment caused by lateral force by taking ...
Zhanzhong Yin, Hui Zhang, Wenwei Yang
doaj   +1 more source

Experimental and Numerical Investigation of Integrated Steel Shear Walls with Varying Web Width-to-Thickness Ratios

Advances in Materials Science and Engineering, 2023
The cold-formed steel-framed shear wall sheathed with steel sheet is widely used as a lateral force-resisting system for light-framed construction. However, the boundary conditions of the screw joint are not clear when steel is screwed to the frame.
Doo-Yong Lee, Bong-Ho Cho, Dam-I. Jung
doaj   +1 more source

Analysis and Application of Double Steel Plate Concrete Composite Shear Wall in the R&D Building of Zhanjiang Bay Laboratory

Buildings, 2023
The R&D Building of Zhanjiang Bay Laboratory is a high-rise structure with multiple irregular items exceeding the specification limit, employing a steel frame-shear wall structural system.
Tao Lan, Xiaopeng Wang, Yuansheng Cui, Xin Liu, Yong You   +4 more
doaj   +1 more source

Numerical and parametrical investigations of the behavior of composite steel plate shear walls with opening [PDF]

مهندسی عمران شریف, 2021
The use of steel shear walls has been considered as a lateral load-bearing system in tall buildings. The significant advantage of Composite Steel Plate Shear Wall (CSPSW) is that the buckling of the infill steel plate, which is a serious disadvantage of ...
M. Ebadi Jamkhaneh, M. Ahmadi
doaj   +1 more source

Hysteretic Assessment of Steel-Concrete Composite Shear Walls

International Journal of Recent Technology and Engineering (IJRTE), 2019
This paper focuses on the hysteretic assessment of steel-concrete composite shear walls with reinforced concrete on one side of the steel plate. Finite element software ABAQUS is utilised to conduct this research. An experimental test on a composite shear wall is simulated to do the verification of the modelling. Then, modelling result is compared with
Bahrami, Alireza, Yavari, Mojtaba
openaire   +2 more sources

Stiffness and Strength Of Perforated Steel Plate Shear Wall

Procedia Engineering, 2011
AbstractSteel Plate Shear Walls (SPSW) have been used as a lateral-load-resisting system in buildings. With formation of tension fields, unstiffened SPSW possesses good ductility and high energy dissipating capability under cyclic loading. However, large demand is induced to the frame members from panel yielding.
Chan, Ricky, Albermani, Faris, Kitipornchai, S.   +2 more
openaire   +3 more sources

EVALUATION OF THE INTERACTION OF STEEL SLIT PANEL-FRAME [PDF]

Journal of Structural and Construction Engineering, 2019
All buildings need a system that resists the lateral forces such as wind and earthquake. Such systems are commonly known as Lateral Force Resisting (LFR) Systems.
ahmad nazifi, Hashem Shariatmadar
doaj   +1 more source