Results 21 to 30 of about 297,907 (210)
Czasopismo Techniczne, 2019 The paper presents a study on microstructure and microhardness changes obtained in the spun carbon steel tube after shaping by a laser beam. The surface of a pipe was machined circumferentially using a 1500 W CO2 laser beam at various diameters (distance from the focus).
Norbert Radek +2 more
openaire +3 more sources
Research on Compression Behavior of Square Thin-Walled CFST Columns with Steel-Bar Stiffeners
Applied Sciences, 2018 Local buckling in steel tubes was observed to be capable of reducing the ultimate loads of thin-walled concrete-filled steel-tube (CFST) columns under axial compression.
Zhao Yang, Chengxiang Xu
doaj +1 more source
Data in Brief, 2020 Presented in this article are 2D and 3D graphical datasets in the form of micrographs and tomograms that were obtained as part of a systematic microstructural characterization by scanning electron microscopy and X-ray microtomography to illustrate freeze-
Kaiyang Yin +3 more
doaj +1 more source
The modern trends of development of the pipe and tube industry [PDF]
Metalurgija, 2010 First the paper presents a review of steel production of the tubes in world: possible potencial is about 110 × 106 the tons (35 × 106 seamless tubes, rest welding tubes). In 2007. y.
YU. G. Gulyayev +4 more
doaj
HIGH FREQUENCY INDUCTION WELDING OF HIGH SILICON STEEL TUBES [PDF]
Tecnologia em Metalurgia, Materiais e Mineração, 2012 High-Si steel is a low cost alternative for the fabrication of tubular structures resistant to atmospheric corrosion. However, the literature has often pointed out that steels presenting a higher Si content and/or a lower Mn/Si ratio have higher ...
Ricardo Miranda Alé +4 more
doaj +1 more source
Effect of reinforcement stiffeners on square concrete-filled steel tubular columns subjected to axial compressive load [PDF]
, 2014 Eight stiffened square concrete-filled steel tubular (CFST) stub columns with slender sections of encasing steel and two non-stiffened counterparts were tested subjected to axial compressive load.
Fu, F., Wang, Y., Yang, Y.
core +1 more source
InfrastructuresThis study aimed to evaluate the effectiveness of a novel concrete-encased column (CE) using small circular steel tubes filled with cementitious grouting material (GFST) as the primary reinforcement instead of traditional steel bars.
Ahlam A. Abbood +3 more
doaj +1 more source
Developments in the Built Environment, 2022 New self-compacting concrete (SCC) mixtures were designed to improve the interfacial bond strength in concrete-filled steel tubes (CFST) at 30 days and one year.
Raed M. Abendeh +2 more
doaj +1 more source
Shaft bearing behaviors of micro cast-place piles with steel tubes
Yantu gongcheng xuebao, 2019 The micro cast-in-place pile with steel tubes is one of the micro-piles, which is often used in the foundation reinforcement of buildings. Based on the static load test results of micro cast-in-place piles with steel tubes in a foundation reinforcement ...
PAN Jian , YUAN Wen-jun , VAISHALI Sharma , CHENG Sai
doaj +1 more source
Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
Science and Engineering of Composite Materials, 2012 The main objective of this investigation is to assess the feasibility of strengthening square hollow steel tubular sections subjected to compression and to develop or predict the suitable wrapping scheme of fibre reinforced polymer (FRP) to enhance the ...
Sundarraja Muthukamatchi Chelliah +1 more
doaj +1 more source