Results 1 to 10 of about 99,739 (257)
Applied Sciences, 2022 Inkjet-printed strain gauges on flexible substrates have recently been investigated for biomedical motion detection as well as the monitoring of structural deformation.
Hyunkyoo Kang +3 more
doaj +3 more sources
Structural Uncertainty Analysis of High-Temperature Strain Gauge Based on Monte Carlo Stochastic Finite Element Method [PDF]
Sensors, 2023 The high-temperature strain gauge is a sensor for strain measurement in high-temperature environments. The measurement results often have a certain divergence, so the uncertainty of the high-temperature strain gauge system is analyzed theoretically ...
Yazhi Zhao +4 more
doaj +2 more sources
Gauge Factor and Stretchability of Silicon-on-Polymer Strain Gauges [PDF]
Sensors, 2013 Strain gauges are widely applied to measure mechanical deformation of structures and specimens. While metallic foil gauges usually have a gauge factor slightly over 2, single crystalline silicon demonstrates intrinsic gauge factors as high as 200 ...
Nanshu Lu, Shixuan Yang
doaj +3 more sources
Dependance of Gauge Factor on Micro-Morphology of Sensitive Grids in Resistive Strain Gauges
Micromachines, 2022 The effect of micro-morphology of resistive strain gauges on gauge factor was investigated numerically and experimentally. Based on the observed dimensional parameters of various commercial resistive strain gauges, a modeling method had been proposed to ...
Yinming Zhao +6 more
doaj +1 more source
Finite Element Model of the Strain Gauge For Determining Uniaxial Tension [PDF]
Transactions of the VŠB-Technical University of Ostrava, Mechanical Series, 2013 Strain gauge is device used to measure the mechanical strains of solid bodies. Deformation of the strain gauge element causes changes its electrical resistance.
Vladimír GOGA
doaj +1 more source
Key technology and application of DRY-1B capacitive component borehole strain gauge
Dizhi lixue xuebao, 2023 This paper briefly describes the theoretical basis of the DRY-1B capacitive component drilling strain gauge (drilling strain gauge). It discusses critical technologies such as micro-displacement sensing, noise reduction, temperature control, performance ...
PENG Hua +4 more
doaj +1 more source
Evaporation of Ti/Cr/Ti Multilayer on Flexible Polyimide and Its Application for Strain Sensor
Micromachines, 2021 A flexible Ti/Cr/Ti multilayer strain gauge have been successfully developed based on polyimide substrate. The pure Ti metal strain gauge have shown the hysteresis phenomenon at the relationship between resistance and strain during tensile test.
Yu-Jen Hsiao +3 more
doaj +1 more source
Materials & Design, 2022 In the present study, thin-film strain gauge element arrays were prepared based on large-area silicon oxycarbide thin films and lithographic deposition of structured electrodes.
Emmanuel Ricohermoso, III +4 more
doaj +1 more source
Fabrication and piezoresistance of high temperature ITO thin film strain gauge
Cailiao gongcheng, 2020 High temperature thin film strain gauges are widely used in the strain measurement of extreme conditions, especially in the high temperature components. ITO thin film strain gauges can generally be applied to the strain measurements above 1000℃. ITO high
YANG Shen-yong +7 more
doaj +1 more source
Foil Strain Gauges Using Piezoresistive Carbon Nanotube Yarn: Fabrication and Calibration
Sensors, 2018 Carbon nanotube yarns are micron-scale fibers comprised by tens of thousands of carbon nanotubes in their cross section and exhibiting piezoresistive characteristics that can be tapped to sense strain. This paper presents the details of novel foil strain
Jandro L. Abot +21 more
doaj +1 more source