Results 81 to 90 of about 202,738 (199)
Open EngineeringThis article presents an experimental investigation into alternative strategies for enhancing the interaction of H-shaped steel sections embedded in normal reinforced concrete.
Al-Jafal Alaulddin A. +1 more
doaj +1 more source
MULTI-OBJECTIVE NEURAL NETWORK MODELING FOR IMPROVING STUD ARC WELDING PROCESS JOINING [PDF]
Journal of Engineering Science and Technology, 2011 An effective stud weld algorithm has been developed using a tensile strength response. A multi objectives neural network modeling was used to get higher tensile strength with lower variance.
RIYADH MOHAMMED ALI HAMZA
doaj
Small, EarlyView.Hybrid 1D–2D architectures redefine material design strategies for TFLIBs by decoupling competing performance parameters. This approach accelerates the transition of TFLIBs from proof of concept to practical wearable technologies. ABSTRACT Transparent and flexible lithium‐ion batteries (TFLIBs), enabled by advanced nanomaterials and flexible ...
Raviraj Madesan, Anand Sreekantan Thampy
wiley +1 more source
An Automotive Body-in-White Welding Stud Flexible and Efficient Recognition System
IEEE AccessThe traditional stud welded inspection method suffers from low efficiency and a lack of precision, which makes it difficult to meet the demand for high efficiency and precision in modern automobile production lines.
Hong Huang +5 more
doaj +1 more source
steel research international, EarlyView.The high‐strain‐rate behavior of resistance spot‐welded DP800–DP1000 joints is investigated. Results show that microstructural gradients across BM–HAZ–FZ govern hardness, strain rate sensitivity, and failure modes. While strength increases with strain rate, energy absorption is controlled by ductility, with DP800–DP800 joints showing superior ...
Pankaj Shrivastava, Velaphi Msomi
wiley +1 more source
steel research international, EarlyView.In primary electric arc furnace (EAF) steelmaking, carbon boiling removes nitrogen from liquid steel and sustains slag foaming. In 100% scrap‐ or hydrogen direct reduced iron (HDRI)‐based EAF steelmaking, carbon boiling is absent; therefore, carbonaceous material and oxygen injection into the slag is needed to maintain foaming and avoid nitrogen ...
Zushu Li +3 more
wiley +1 more source
BuildingsFatigue damage in steel–concrete composite structures frequently initiates at welded joints due to stress concentrations and inherent defects. This study investigates the stress intensity factors (SIFs) associated with fatigue cracks in the welds of ...
Da Wang +6 more
doaj +1 more source
Rotation capacity of continuous reinforced concrete slab strips revisited
Structural Concrete, EarlyView.Abstract Rotation capacity is a key characteristic of statically indeterminate reinforced concrete structures, as it (i) enables bending moment redistributions, whether intentionally introduced through optimized reinforcement layouts or arising from unforeseen self‐equilibrated stress states, and (ii) promotes large rotations at failure load, thereby ...
Nathalie Reckinger +2 more
wiley +1 more source
Anchorage performance of different punching shear reinforcement elements in cracked concrete
Structural Concrete, EarlyView.Abstract Extensive research has been conducted on the bond and anchorage behavior of reinforcement elements in concrete. While many experimental studies have focused on uncracked concrete, the anchorage performance in the presence of cracks remains insufficiently understood.
Niklas Mueller +3 more
wiley +1 more source
Wildlife Society Bulletin, EarlyView.We used drone‐based radiotelemetry and multispectral imagery to estimate detection and survival probabilities of blue‐winged teal broods in Saskatchewan, Canada. Weekly brood survival probabilities, estimated via Cormack‐Jolly‐Seber models, increased with age and were comparable between drone methods.
Grant A. Rhodes +5 more
wiley +1 more source