Results 161 to 170 of about 186,186 (186)
Some of the next articles are maybe not open access.
Proton conducting composite membranes from sulfonated polyether ether ketone and SiO2
Journal Wuhan University of Technology, Materials Science Edition, 2009Proton conducting composite membranes from sulfonated polyether ether ketone and SiO2 for direct methanol fuel cell (DMFC) application were prepared with sulfonated polyether ether ketone(SPEEK) and tetracethoxy silane(TEOS) by sol-gel method. The covalent crosslinking structure was formed between —SO3H of SPEEK via SiO2.
Gaowen Zhang +3 more
exaly +2 more sources
Carbohydrate Polymers, 2021
Developing bioactive composites to fill bone cavities caused by disease, injury or surgery still remains a challenge. The aim of this research was to develop a new nanostructured sodium alginate/sulfonated polyether ether ketone/nano-hydroxyapatite (Alg/SPEEK/HA) biocomposite via a simple chemical precipitation strategy. Structural analysis was carried
openaire +2 more sources
Developing bioactive composites to fill bone cavities caused by disease, injury or surgery still remains a challenge. The aim of this research was to develop a new nanostructured sodium alginate/sulfonated polyether ether ketone/nano-hydroxyapatite (Alg/SPEEK/HA) biocomposite via a simple chemical precipitation strategy. Structural analysis was carried
openaire +2 more sources
Scaleup suitability of sulfonated polyether ether ketone membrane‐based microbial fuel cell
Environmental Progress & Sustainable Energy, 2015A sustainable clean energy production from oxidation of biodegradable materials was carried out in a microbial fuel cell (MFC) stack consisting of four MFC units. The stack was fabricated and tested for its scalability using a high engineering, low oxygen mass transfer membrane; namely, sulfonated poly ether ether ketone. Sodium acetate was used as the
Mahendiravarman Elangovan +1 more
openaire +1 more source
AIP Conference Proceedings, 2020
The challenge of commercialization of fuel cells in Indonesia is mainly the caused by high manufacturing costs, particulary the cost of electrolyte membrane which is one of the important components of fuel cells. The use of inexpensive and abundant local materials such as sulfonated polyether ether ketone polymers and chitosan, to replace the currently
Tri Harmoko +3 more
openaire +1 more source
The challenge of commercialization of fuel cells in Indonesia is mainly the caused by high manufacturing costs, particulary the cost of electrolyte membrane which is one of the important components of fuel cells. The use of inexpensive and abundant local materials such as sulfonated polyether ether ketone polymers and chitosan, to replace the currently
Tri Harmoko +3 more
openaire +1 more source
International Journal of Hydrogen Energy, 2019
Abstract A model of a membrane-electrode assembly (MEA) with a Sulfonated Poly Ether-Ether Ketone (SPEEK) membrane is presented and compared with Nafion membrane MEA. The model used the specific hydration and proton conductivity curves developed for SPEEK membrane and accounted for feed-gas momentum and mass transfer, electro-potential in both the ...
Soosan Rowshanzamir
exaly +2 more sources
Abstract A model of a membrane-electrode assembly (MEA) with a Sulfonated Poly Ether-Ether Ketone (SPEEK) membrane is presented and compared with Nafion membrane MEA. The model used the specific hydration and proton conductivity curves developed for SPEEK membrane and accounted for feed-gas momentum and mass transfer, electro-potential in both the ...
Soosan Rowshanzamir
exaly +2 more sources
Journal of the Science of Food and Agriculture
AbstractBACKGROUNDPolyether ether ketone (PEEK) was modified by a sulfuric and nitric acid mixed system to improve the solubility of the material and the gas selective permeability of the film. SN1 and SN5, synthesized from mixed acid systems (with ratios of nitric acid and sulfuric acid of 1:1 and 1:5, respectively) were chosen because they had ...
Yuting Huang
exaly +3 more sources
AbstractBACKGROUNDPolyether ether ketone (PEEK) was modified by a sulfuric and nitric acid mixed system to improve the solubility of the material and the gas selective permeability of the film. SN1 and SN5, synthesized from mixed acid systems (with ratios of nitric acid and sulfuric acid of 1:1 and 1:5, respectively) were chosen because they had ...
Yuting Huang
exaly +3 more sources
International Journal of Hydrogen Energy, 2015
Abstract In this study, a single layer graphene oxide is successfully synthesized and used as a nano-filler in a self-fabricated sulfonated polyether ether ketone (SPEEK) to make a composite proton exchange membrane, graphene oxide/SPEEK (GO-SPEEK). The properties of GO-SPEEK, Nafion® 117 and SPEEK are then compared to ascertain their selectivity to ...
Wan Ramli Wan Daud +2 more
exaly +2 more sources
Abstract In this study, a single layer graphene oxide is successfully synthesized and used as a nano-filler in a self-fabricated sulfonated polyether ether ketone (SPEEK) to make a composite proton exchange membrane, graphene oxide/SPEEK (GO-SPEEK). The properties of GO-SPEEK, Nafion® 117 and SPEEK are then compared to ascertain their selectivity to ...
Wan Ramli Wan Daud +2 more
exaly +2 more sources
Macromolecular Materials and Engineering, 2016 Appropriate membrane for blood contacting applications requires hemocompatibility and high permeation flux; it should inhibit proteins or platelets adsorption and still possess high permeability. Aiming to improve the polyethersulfone (PES) hollow fiber membrane hemocompatibility, sulfonated polyether ether ketone (SPEEK) is self‐synthesized in the ...
Azadeh Ghaee +2 more
exaly +2 more sources
AIP Conference Proceedings, 2013
A simple and effective method for the preparation of sulfonated polyether ether ketone (SPEEK) based composites with electrochemical reduced graphene oxide (EGO) as inorganic fillers has been described. The resulting dispersions are homogeneous and the cast membranes show significant improvement on tensile strength and thermal properties.
S. Seetharaman +2 more
openaire +1 more source
A simple and effective method for the preparation of sulfonated polyether ether ketone (SPEEK) based composites with electrochemical reduced graphene oxide (EGO) as inorganic fillers has been described. The resulting dispersions are homogeneous and the cast membranes show significant improvement on tensile strength and thermal properties.
S. Seetharaman +2 more
openaire +1 more source
Journal of Materials Science Letters, 2003
Direct methanol fuel cells (DMFC) have attracted considerable attention, since they offer numerous benefits, such as high efficiency, high power density, low or zero emissions and reliability. The proton exchange membrane (PEM) is one of the most critical components in the direct methanol fuel cell. Generally, PEMs with high proton conductivity and low
Lei Li, Jun Zhang, Yuxin Wang
openaire +1 more source
Direct methanol fuel cells (DMFC) have attracted considerable attention, since they offer numerous benefits, such as high efficiency, high power density, low or zero emissions and reliability. The proton exchange membrane (PEM) is one of the most critical components in the direct methanol fuel cell. Generally, PEMs with high proton conductivity and low
Lei Li, Jun Zhang, Yuxin Wang
openaire +1 more source