Results 31 to 40 of about 415 (138)
Cause Analysis of Burst Tube of Final-Stage Superheater Tube in a Power Station Boiler
In the long-term overheating operation condition, the boiler high temperature superheater is easy to cause the deterioration of materials and the decline of material structure and performance, and causes the pipe explosion accident.
Kuang YU +3 more
doaj +1 more source
Application of Machine Learning in the Study of Creep Properties of Alloys
ABSTRACT Creep resistance is a critical performance indicator for alloy components operating under extreme conditions such as high temperature, high pressure, and long‐term loading, directly affecting operational reliability in key sectors, including the aerospace, nuclear power, and deep‐sea sectors.
Kai Zhou +4 more
wiley +1 more source
Effects of the Distribution of Heating Surface Areas on the Performance of Bagasse Boiler
Main components of a bagasse boiler are furnace, evaporator, superheater, boiler bank, economizer, and air heater. Combustion of fuel and air in the furnace produces thermal energy that is used to evaporate feed water in the evaporator.
Somchart Chantasiriwan
doaj +1 more source
The paper presents a thermodynamic analysis of secondary overheating in turbo-expander plants on low-boiling working fluids. The possibility of optimizing the parameters of the working fluid in a secondary stem superheater has been studied.
A. V. Ovsyannik, V. P. Kliuchinski
doaj +1 more source
ABSTRACT This study demonstrates a new strategy for modifying the boron content to address stress‐relief cracking (SRC) in the 7CrMoVTiB10.10 alloy. First, coarse‐grained heat‐affected zone (CGHAZ) specimens with different boron contents were prepared via simulated welding thermal cycles.
Dongdong Zhang +3 more
wiley +1 more source
Performance degradation analysis of a medium pressure superheater due to tube deactivation
Steam is essential in petrochemical industries for the transportation of thermal energy and usage in some reforming process. Superheaters are heat exchangers that convert saturated steam to dry steam by utilizing waste heat from the flue gas stream ...
Ahmad Syafiq Haqim +2 more
doaj +1 more source
Pressurized Solid Oxide Electrolysis—Operational Strategies
ABSTRACT Pressurized high‐temperature electrolysis is a promising pathway for high‐efficiency hydrogen production that enables direct compression and heat recovery opportunities not accessible to low‐temperature electrolysis. While laboratory testing is routinely conducted near atmospheric pressure, there is increasing interest in commercial deployment
Stephen Woodward +2 more
wiley +1 more source
ABSTRACT To alleviate the impact of the instability of renewable energy power generation on the power grid, coal‐fired power plants (CFPPs) have to undertake peak shaving tasks, which puts forward high requirements for the flexibility of CFPPs. To enhance the flexibility of CFPPs to consume more renewable energy, this paper innovatively proposes a ...
Yuguo Ni, Keliang Liu, Miao Yu, Hao Zhou
wiley +1 more source
Corrosion Behaviour of Various Superheater Steels in Cleaning Solutions
In recent years, with the increase in the national power supply demand, a large number super-critical units have been put into production in thermal power plants.
Xigang Yang, Hao Zhang, Yu Tan
doaj +1 more source
Effect of Temperature on Penetration of Test Liquid into Boiler Pipe
Limitations of time in conducting superheater inspections during overhaul, allowing inspectors to conduct liquid penetrant testing activities above pre-determined temperatures. This results in results obtained from the superheater inspection tube boiler
Zaenal Abidin Zaenal Abidin +4 more
doaj +1 more source

