Results 31 to 40 of about 7,580 (125)

Sonicating polycarboxylate-based superplasticizer for application in cementitious matrix

open access: yesRevista IBRACON de Estruturas e Materiais, 2022
Sonication is widely used for nanomaterials dispersion in cementitious matrices. Polycarboxylate-based superplasticizer (SP) admixtures are usually incorporated in the aqueous nanomaterials suspension before sonication to improve the dispersion of these ...
Laura Silvestro   +5 more
doaj   +1 more source

Compatibility Assessment of Commercial Cements with superplasticizers [PDF]

open access: yesE3S Web of Conferences, 2020
In the present study, compatibility assessment of commercially available cements (OPC and PPC) and SNF & PCE based super plasticizers are made by evaluating the workabilities, setting times and compressive strengths of M40 grade concrete mixes made with ...
Shrihari S   +3 more
doaj   +1 more source

The Preparation Research of Powder Polycarboxylate Superplasticizer

open access: yes, 2011
This paper uses centrifugal spray drying process to prepare powder polycarboxylate superplasticizer. The best spray drying process: speed of centrifugal atomizer is 16000r/min, feed liquid temperature is 30°C, import / export air temperature of drying ...
Miao Miao Gui   +5 more
core   +1 more source

Superplasticizer and hydrated lime for high-strength concrete

open access: yesTeknika, 2023
According to SNI03-6468-2000, high-strength concrete is concrete with a minimum compressive strength of 41.4 MPa. The high strength concrete is useful in precast and prestressed concrete.
Kosim Kosim, Julian Fikri
doaj   +1 more source

Properties of superplasticizer-amended superfine cement grouted sand

open access: yes, 2019
The effect of superplasticizer on the grouting performance of superfine cement and the engineering properties of grouted sand were investigated. At first, the bleeding, setting time, and viscosity tests were conducted to determine the rheological ...
Avci, Eyübhan, Mollamahmutog?lu, Murat
core   +2 more sources

Behavior of manufactured sand and recycled coarse aggregate concrete‐filled steel tubular stub columns with circular section

open access: yesStructural Concrete, EarlyView.
Abstract Accelerated urbanization has intensified environmental concerns due to excessive natural resource consumption and construction waste generation. Circular concrete‐filled steel tube (CFST) columns incorporating manufactured sand recycled coarse aggregate (MS‐RCA) concrete have emerged as an innovative composite element offering notable ...
Minsheng Guan   +7 more
wiley   +1 more source

Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete

open access: yes, 2022
This study investigates a method of enhancing the foaming behaviour using a superplasticizer in geopolymer foam concrete (GFC) produced by the chemical foaming method.
Pasupathy, Kirubajiny   +2 more
core   +1 more source

Pengaruh Pengerasan Beton Menggunakan Superplasticizer Terhadap Kuat beton Busa [PDF]

open access: yes, 2022
 A new product of lightweight concrete that has a low specific gravity that is increasingly used in the world of construction is foam concrete. In this study, testing the addition of superplasticizers to the foam concrete mixture was carried out, by
M Royan   +5 more
core   +1 more source

Prediction of compressive strength of cementitious grouts for semi-flexible pavement application using machine learning approach

open access: yesCase Studies in Construction Materials, 2023
This study involves the preparation of cement grout samples by varying proportions of superplasticizer (SP) and water-cement (w/c) ratio (0.25–0.45) which were tested for computing flow value and 1-day, 7-day, and 28-day compressive strength.
Muhammad Imran Khan   +7 more
doaj   +1 more source

Structural testing and analytical model of Reinforced Concrete (RC) prisms with 3D‐printed concrete permanent formwork under compressive loading

open access: yesStructural Concrete, EarlyView.
Abstract The implementation of traditional steel reinforcement in 3D concrete printed structures is a major challenge. Although 3D‐printed structures may be used as formwork, the knowledge about their structural contribution is limited. This research aims to experimentally evaluate the structural performance of reinforced concrete prisms with 3D ...
Luis M. de la Flor Juncal   +3 more
wiley   +1 more source

Home - About - Disclaimer - Privacy