Results 271 to 280 of about 22,212 (307)
Some of the next articles are maybe not open access.
Tensile and Tearing Strength Properties of Printed Cotton Fabric Using Warp Yarn Printing Technique
Applied Mechanics and Materials, 2016Warp yarn of cotton samples were printed with pigment dyes has been investigated. The printed warp yarn was weaved by using white cotton yarn as a weft yarn. The physical properties were evaluated to testing in tensile strength and tearing strength of weaved samples, the test were determined according to ISO standard.
Kittisak Ariyakuare +3 more
openaire +1 more source
Effect of glass filler size on the tensile properties and tear strength of polybutadiene
Journal of Polymer Science: Polymer Physics Edition, 1982AbstractAn experimental study of the tensile properties, tear strength, hysteresis, and swelling ratio of model composite elastomeric compounds consisting of polybutadiene filled with glass beads has been carried out as a function of the size of the beads.
Y. Eckstein, P. Dreyfuss
openaire +1 more source
European Polymer Journal, 1989
Abstract The cure times (t90), tensile strengths and tear strengths of silica-filled epoxidised natural rubber (ENR), with or without the presence of γ-mercaptopropyltrimethoxysilane (A-189) and bis(triethoxysilylpropyl) tetrasulphide (Si-69) and cure using a semi-efficient vulcanisation (semi-EV system) were studied.
M. Nasir, B.T. Poh, P.S. Ng
openaire +1 more source
Abstract The cure times (t90), tensile strengths and tear strengths of silica-filled epoxidised natural rubber (ENR), with or without the presence of γ-mercaptopropyltrimethoxysilane (A-189) and bis(triethoxysilylpropyl) tetrasulphide (Si-69) and cure using a semi-efficient vulcanisation (semi-EV system) were studied.
M. Nasir, B.T. Poh, P.S. Ng
openaire +1 more source
Journal of Interdisciplinary Dentistry, 2020
Aims: The aim of the study was to evaluate and compare physical properties such as tensile strength and tear strength of three commonly used silicone maxillofacial materials in Indian climatic condition. Settings and Design: An in vitro study was conducted to compare the tensile and tear strength using a universal testing machine with 100 N load at a ...
Anoop Sharma +2 more
openaire +1 more source
Aims: The aim of the study was to evaluate and compare physical properties such as tensile strength and tear strength of three commonly used silicone maxillofacial materials in Indian climatic condition. Settings and Design: An in vitro study was conducted to compare the tensile and tear strength using a universal testing machine with 100 N load at a ...
Anoop Sharma +2 more
openaire +1 more source
Rubber Chemistry and Technology, 1999
Abstract A black-filled styrene-butadiene rubber (SBR) vulcanizate was ambiently ground, then used as an additive to the original, uncured compound. Sheets of the resulting composite (matrix/ground rubber particulate) were cured, and tensile and trouser tear strength determined.
D. Gibala, D. Thomas, G. R. Hamed
openaire +1 more source
Abstract A black-filled styrene-butadiene rubber (SBR) vulcanizate was ambiently ground, then used as an additive to the original, uncured compound. Sheets of the resulting composite (matrix/ground rubber particulate) were cured, and tensile and trouser tear strength determined.
D. Gibala, D. Thomas, G. R. Hamed
openaire +1 more source
Relationship of Tensile and Tear Strengths of Fabrics to Component Yarn Properties
1970Abstract : The investigation was conducted on six selected fabrics to determine the relationship of breaking load, elongation and tear strength of fabrics to the properties of the component yarns. A system for expressing fabric properties as ratios of the contributing yarn properties was developed.
Clarence J. Pope, Vasant K. Devarakonda
openaire +1 more source
European Polymer Journal, 1988
Abstract A study has been made of the cure times (t90), the tensile strengths and the tear strengths of silica-filled NR, NBR and SBR, with and without the presence of γ-mercaptopropyltrimethoxysilane, (MPTS) and cured using the semi-efficient vulcanization system (semi-EV). Mixing was done using a Brabender Plasti-corder having a mixing cam attached
M. Nasir, B.T. Poh, P.S. Ng
openaire +1 more source
Abstract A study has been made of the cure times (t90), the tensile strengths and the tear strengths of silica-filled NR, NBR and SBR, with and without the presence of γ-mercaptopropyltrimethoxysilane, (MPTS) and cured using the semi-efficient vulcanization system (semi-EV). Mixing was done using a Brabender Plasti-corder having a mixing cam attached
M. Nasir, B.T. Poh, P.S. Ng
openaire +1 more source
Journal of Polymer Science Part B: Polymer Physics, 1994
AbstractAt any given crosslink density, the ultimate tensile and tear strengths of vulcanizates depend on the curing system and decrease in the order: conventional (CV) > efficient (EV) > peroxide > radiation cured. Measurements on three network parameters were interpreted as indicating that crosslinks were not uniformly distributed throughout
J. H. A. Grobler, W. J. McGill
openaire +1 more source
AbstractAt any given crosslink density, the ultimate tensile and tear strengths of vulcanizates depend on the curing system and decrease in the order: conventional (CV) > efficient (EV) > peroxide > radiation cured. Measurements on three network parameters were interpreted as indicating that crosslinks were not uniformly distributed throughout
J. H. A. Grobler, W. J. McGill
openaire +1 more source
Advanced Materials Research, 2015
Fillers play important roles in enhancing mechanical properties of NR latex films. The effect of filler dispersion and amount of dispersing agent to the tensile strength and tearing energy of NR latex films were investigated in this study. The studies were carried out by (i) varying the amount of dispersing agent (Anchoid) added which is an anionic ...
Siti Aisyah Jarkasi +3 more
openaire +1 more source
Fillers play important roles in enhancing mechanical properties of NR latex films. The effect of filler dispersion and amount of dispersing agent to the tensile strength and tearing energy of NR latex films were investigated in this study. The studies were carried out by (i) varying the amount of dispersing agent (Anchoid) added which is an anionic ...
Siti Aisyah Jarkasi +3 more
openaire +1 more source
Journal of Cataract and Refractive Surgery, 2012
To evaluate the influence of trypan blue staining on capsulorhexis tear resistance using a model for mechanical measurement of the entire capsular bag of fresh human cadaver eyes.John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA.Experimental study.After the cornea and iris were removed, a 5.0 to 5.5 mm anterior continuous ...
Ryan, Jaber +6 more
openaire +2 more sources
To evaluate the influence of trypan blue staining on capsulorhexis tear resistance using a model for mechanical measurement of the entire capsular bag of fresh human cadaver eyes.John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA.Experimental study.After the cornea and iris were removed, a 5.0 to 5.5 mm anterior continuous ...
Ryan, Jaber +6 more
openaire +2 more sources