Results 201 to 210 of about 10,397,309 (238)
Some of the next articles are maybe not open access.

Tensile Properties and Desalination Performance of Modified Cellulose Acetate Membranes

International Journal of Polymeric Materials and Polymeric Biomaterials, 1978
Abstract The effects of annealing temperature on the mechanical properties and the desalination performance of cellulose acetate membranes have been investigated. A critical temperature T c exists at which all membrane properties change abruptly.
Migliaresi, Claudio   +4 more
openaire   +3 more sources

Theoretical tensile model and cracking performance analysis of laminated rubber bearings under tensile loading

Structural Engineering and Mechanics, 2014
To analyze the tension performance of laminated rubber bearings under tensile loading, a theoretical tension model for analyzing the rubber bearings is proposed based on the theory of elasticity. Applying the boundary restraint condition and the assumption of incompressibility of the rubber (Poisson\'s ratio of the rubber material is about 0.5 ...
Shicai Chen   +4 more
openaire   +1 more source

Tensile zone effects on performance of layered systems

Géotechnique, 1987
For a two-layered soil system in which the upper layer is stiffer than the lower layer most analytical models predict a horizontal tensile stress in the bottom of the upper layer under vertical surface loading. For the usually assumed geostatic stress conditions representing the unloaded state, failure will be indicated.
openaire   +1 more source

Research on Tensile Recovery Performance of Running Clothing Fabric

Advanced Materials Research, 2013
During the process of running, running clothing fabrics are in constantly stretching, rubbing and humid environment. However, the previous investigations of the fabric are usually a single performance or the combination of two performance researches. Therefore, this article will consider the athletes body muscles stretch rate, the athlete body sweat ...
Si Si Feng, Li Min Shi, Peng Nie, Na Liu
openaire   +1 more source

Effect of Blending Modification on Tensile Performance of CPE/PVC

Advanced Materials Research, 2011
The samples were modified by using chlorinated polyethylene (CPE) to increase the toughness and using dioctyl phthalate (DOP) to increase the plasticity. The tensile strength and breaking elongation of the samples were studied by changing the chlorinated polyethylene (CPE) and dioctyl phthalate (DOP) contents and the hot-pressing temperature.
Xiao Ling Xie, Wen Hai Li, Ying Hui Wei
openaire   +1 more source

Study on Tensile and Impact Performance for the MWCNTs/EP Composite

Advanced Materials Research, 2014
In this paper, multiwalled carbon nanotubes (MWCNTs)/epoxy resins (EP) composite was prepared by situ polymerization. MWCNTs/EP composites were prepared with different content of MWCNTs. The study of morphology and properties showed certain content of MWCNTs can well homogeneous dispersed in EP. Since of interface interaction between MWCNTs and EP, the
Fei Yan, Jing Wen Fu, Dong Yu Zhao
openaire   +1 more source

Tensile Strength of High Performance Concrete

International Conference on Civil, Structural and Transportation Engineering, 2023
César Echavarría   +3 more
openaire   +1 more source

Improved performance in tensile-strained long wavelength lasers

13th IEEE International Semiconductor Laser Conference, 2005
A tensile-strained active region enhances TM gain, reducing radiative currents in semiconductor lasers. Auger recombination is reduced but not intervalence band absorption. Tensile InGaAs/InGaAsP approaches a Type II band line-up, increasing barrier-related losses.
G. Jones   +5 more
openaire   +1 more source

3D-printed geogrids’ tensile performance: impact of filament type

Rapid Prototyping Journal
Purpose This study aims to explore the potential of three-dimensional (3D) printing technology to enhance geogrid production, focusing on the influence of filament type on tensile performance. Geogrids, which reinforced soils by forming interlocking mechanisms with soil grains, were manufactured using polypropylene (PP) and polyethylene terephthalate ...
SARICI, TALHA   +4 more
openaire   +2 more sources

Note on Performance of Tapered Grip Tensile Loading Devices

Journal of Testing and Evaluation, 1975
Abstract Alignment results are presented in terms of percent bending for a quick release, tapered grip, tensile loading device that has been proposed for testing sharply notched specimens of aluminum and magnesium alloys by a Task Group of the ASTM Committee E-24 on Fracture Testing of Metals. The results show that the bending introduced
MH Jones, WF Brown
openaire   +1 more source

Home - About - Disclaimer - Privacy