Results 41 to 50 of about 39,741 (305)
Meso-scale modelling of 3D woven composite T-joints with weave variations [PDF]
, 2019 A meso-scale modelling framework is proposed to simulate the 3D woven fibre architectures and the mechanical performance of the composite T-joints, subjected to quasi-static tensile pull-off loading. The proposed method starts with building the realistic
Long, Andrew, Yan, Shibo, Zeng, Xuesen
core +3 more sources
Prestressed textile reinforced concrete with carbon composite reinforcement
Acta Polytechnica CTU ProceedingsThe article deals with the potential of prestressed textile concrete. The prestressing principle, which is nowadays commonly used part of construction, is combined with the developing technology of textile concrete which is concrete reinforced with non ...
Jan Macháček +4 more
doaj +1 more source
Internal geometry of structurally stitched NCF preforms [PDF]
, 2007 Internal geometry of a textile reinforcement is an important factor of the reinforcement performance during the composite manufacturing and service life.
Koissin, Vitaly +2 more
core +1 more source
Reuse of tyre steel fibres as concrete reinforcement [PDF]
, 2004 To attain economically viable and environmentally friendly tyre recycling, it is necessary to develop new applications and products, which will use tyre by-products (especially the steel cord) as raw materials.
Neocleous, K. +2 more
core +1 more source
Advanced Engineering Materials, EarlyView.A numerical–experimental framework is developed for characterizing multi‐matrix fiber‐reinforced polymers (MM‐FRPs) combining epoxy and polyurethane matrices. Harmonic bending tests are integrated with finite element model updating (FEMU) to simultaneously identify elastic and viscoelastic material parameters.
Rodrigo M. Dartora +4 more
wiley +1 more source
Applied Sciences, 2019 In this study, to compare strengthening efficiency and flexural behaviors of textile- reinforced mortar (TRM) according to various types of strengthening methods without the textile being impregnated, ten specimens were tested.
Jongho Park, Sungnam Hong, Sun-Kyu Park
doaj +1 more source
Advanced Engineering Materials, EarlyView.Geometry‐driven thermal behavior in wire‐arc additive manufacturing (WAAM) influences microstructural evolution during nonequilibrium solidification of a chemically complex Fe–Cr–Nb–W–Mo–C nanocomposite system. By comparing different deposits configurations, distinct entropy–cooling rate correlations, segregation, and carbide evolution are revealed ...
Blanca Palacios +5 more
wiley +1 more source
Actuators, 2021 Electroactive polymers (EAPs), especially dielectric elastomer actuators (DEAs), belong to a very promising and emerging class of functional materials. While DEAs are mostly utilized to rely on carbon-based electrodes, there are certain shortcomings of ...
Sascha Pfeil +7 more
doaj +1 more source
Effect of Laser Deoxidation on Adhesive‐Bonded Aluminum in an Oxygen‐Free Atmosphere
Advanced Engineering Materials, EarlyView.This study investigates laser ablation of aluminum under oxygen‐free conditions. The goal is to produce oxide‐free substrates that enable improved adhesive bonding with epoxy. Optimized laser parameters (90% overlap, 300 µJ) combined with oxide‐free substrates result in the highest tensile strength of the adhesive bond.
Sandra Gerland +5 more
wiley +1 more source
FE tool for drape modelling and resin pocket prediction of fully embedded optical fiber sensor system [PDF]
, 2015 This work highlights some of the achievements obtained within the EU FP7 SmartFiber project, aiming to develop a fully embeddable optical fiber sensor system including the interrogator chip.
Ahmed, Tahira +9 more
core +2 more sources