Results 1 to 10 of about 140 (123)
Thermal Effects in Slender EHL Contacts
Lubricants, 2022 This study deals with experimental and numerical analysis of the thermal effects of slender elastohydrodynamically lubricated (EHL) contacts under high sliding. Thereby, the entrainment direction is along the major axis of the contact ellipse.
Marko Tošić +2 more
doaj +4 more sources
Influence of Manufacturing Error Tolerances on Thermal EHL Behavior of Gears
Lubricants, 2022 Due to the electrification of vehicles, new demands are being imposed on gears, which translates to the tolerances of manufacturing errors. However, not many studies treat the impact of manufacturing error combinations on the lubricant behavior of gear ...
Rikard Hjelm, Jens Wahlström
doaj +4 more sources
Tribology Online, 2008 Under the same EHL contact conditions as in the traction experiments carried out by Wedeven et al., the authors performed a non-Newtonian thermal EHL analysis.
Toshifumi Mawatari +2 more
doaj +6 more sources
Tribology Online, 2009 Under the elliptical contact conditions with an ellipticity parameter of Ke=1.4, a non-Newtonian thermal EHL analysis was carried out. The lubricating oil was assumed to behave as a Maxwell fluid.
Toshifumi Mawatari, Akira Nakajima
doaj +6 more sources
The Transient and Thermal Effects on EHL Performance of a Helical Gear Pair
Tribology Online, 2018 A non-Newtonian numerical solution system for the transient thermo-elastohydrodynamic lubrication (TEHL) model has been proposed for a helical gear pair with the finite line contact theory. This model is used to comprehensively show the transient effect,
Mingyong Liu, Yadong Liu, Chenhui Wu
doaj +3 more sources
Influences of solid and lubricant thermal conductivity on traction in an EHL circular contact [PDF]
Tribology International, 2020 The influences of thermal conductivity of both the contacting solids and the lubricant on the traction in a rolling/sliding EHL contact have been studied numerically. For through-hardened AISI 52000 bearing steel (k was measured as 21 W/mK by Reddyhoff et al.
Gerhard Poll, H C Liu
exaly +2 more sources
Frontiers in Mechanical Engineering, 2021 In this study, a method combining numerical surface generation technology and three-dimensional hot-line contact EHL is employed to evaluate the contact characteristics of micro-textured surfaces under high-load line contact.
Jiang Zhao +7 more
doaj +3 more sources
Frontiers in Manufacturing Technology, 2023 The roller end/rib contact of tapered roller bearings significantly affects lubricating condition and power loss. To improve the lubrication performance of the inner ring rib and the large end of the roller in tapered roller bearings used in railway ...
Xiaoling Liu +3 more
doaj +3 more sources
Thermal Surface Texture EHL Analysis of Water- lubricated Tenmat Bearing
Jixie chuandong, 2016 The elastohydrodynamic lubrication geometric model of surface texture bearing is set up. The numerical simulation of elastohydrodynamic lubrication property of water- lubricated tenmat bearing with circular dimple,rectangular dimple and triangular ...
Dong Ning +3 more
doaj +1 more source
An Improved Load Distribution Model for Gear Transmission in Thermal Elastohydrodynamic Lubrication
Lubricants, 2023 The gear drive generally operates in elastohydrodynamic lubrication (EHL) contacts, and the existence of oil film effectively reduces wear and improves transmission stability.
Ruxin Lu +3 more
doaj +1 more source