Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [PDF]
Mechanics of Advanced Composite Structures, 2023 The main objective of this experimental study is to valorize local materials in order to use them as composite Materials (CM) for construction. In this study case, the CM is composed of fibers of Luffa sponge embedded in plaster.
Khaled Kharrati +3 more
doaj +1 more source
Advanced Porous Particle Model in Biomass Pyrolysis
Chemical Engineering Transactions, 2022 In order to decrease anthropogenic CO2 emissions and to become independent from fossil resources, one alternative for energy generation and production of platform-chemicals is the usage of biomass.
Andrea Dernbecher, Alba Dieguez-Alonso
doaj +1 more source
Effect of Vacuum Heat Treatment on the Chemical Composition of Larch Wood
BioResources, 2016 The effects of vacuum heat treatment were studied relative to the chemical composition of larch wood. The samples were heat-treated in vacuum at 160 °C, 200 °C, and 240 °C for 4 h, and the chemical changes were investigated by wet chemical analysis ...
Zhe Wang +5 more
doaj +1 more source
Influence of Conditions for Production and Thermo-Chemical Treatment of Al2O3 Coatings on Wettability and Energy State of Their Surface [PDF]
, 2020 This article presents the influence of the anodizing parameters and thermo-chemical treatment of Al2O3 coatings made on aluminum alloy EN AW-5251 on the surface free energy.
Władysław Skoneczny +5 more
core +1 more source
Crystals, 2023 This article presents the results of a study to identify intermetallic phases whose role is to limit austenite grain growth in the low-pressure carburizing process.
Konrad Dybowski, Leszek Klimek
doaj +1 more source
Steel Cruciform Sample with Nitrided Arms Achieves Higher Plastic Strain in the Gauge Region
Applied Sciences, 2022 This paper describes a novel solution to increase plastic strain in the gauge region of a cruciform sample during a forming limit test. A nitriding procedure was used to increase the strength of the arms of the specimen and at the same time enabled ...
Grzegorz Mitukiewicz
doaj +1 more source
Disintegration of waste activated sludge via Thermo-Chemical Pre-Treatment.
, 2018 The rate limiting step in the digestion of the waste active sludge is hydrolysis the stage. Thermal pre-treatment and chemical sludge disintegration methods can be used to shorten the biochemical hydrolysis process and increase the digester capacity ...
Şahinkaya, Serkan
core +2 more sources
Acetylene Flow Rate as a Crucial Parameter of Vacuum Carburizing Process of Modern Tool Steels
Archives of Metallurgy and Materials, 2016 Carburizing is one of the most popular and wide used thermo-chemical treatment methods of surface modification of tool steels. It is a process based on carbon diffusive enrichment of the surface material and is applied for elements that are supposed to ...
Rokicki P., Dychton K.
doaj +1 more source
To estimation of contact-fatigue durability of thermo-chemically strengthened gears
Advanced Engineering Research, 2017 Introduction. The specification of the strength characteristics of the diffusion layer of carburized (C) and nitro-carburized (NC) involute gears is described.
Nikolay P. Onishkov, Victor I. Korotkin
doaj +1 more source
Surface Roughness of Glass Ionomer Cements after Application of Different Polishing Techniques
Acta Stomatologica Croatica, 2018 Glass Ionomer Cements (GIC) have been widely used in clinical practice since they have a wide range of positive characteristics: chemical bonding to the tooth surface, fluoride release, a heat-expansion coefficient similar to the tooth, do not require an
Ante Miličević +3 more
doaj +1 more source