Results 211 to 220 of about 17,361 (258)
Some of the next articles are maybe not open access.
Japanese Journal of Applied Physics, 1982
A new selenium thin-film solar cell of superior performance has been developed. The cell incorporates an SnO2/CdSe/Se/Au structure and is fabricated at 250°C or lower by vacuum evaporation only. The maximum efficiency is attained at 60°C, and its value is 4.6% for an AM 1 (Air Mass 1), 100 mW/cm2. This indicates the possibility of using the cell at
Hideo Ito +4 more
openaire +1 more source
A new selenium thin-film solar cell of superior performance has been developed. The cell incorporates an SnO2/CdSe/Se/Au structure and is fabricated at 250°C or lower by vacuum evaporation only. The maximum efficiency is attained at 60°C, and its value is 4.6% for an AM 1 (Air Mass 1), 100 mW/cm2. This indicates the possibility of using the cell at
Hideo Ito +4 more
openaire +1 more source
Microcrystalline Organic Thin‐Film Solar Cells
Advanced Materials, 2013Microcrystalline organic films with tunable thickness are produced directly on an indium-tin-oxide substrate, by crystallizing a thin amorphous rubrene film followed by its use as a template for subsequent homoepitaxial growth. These films, with exciton diffusion lengths exceeding 200 nm, produce solar cells with increasing photocurrents at thicknesses
Verreet, Bregt +3 more
openaire +3 more sources
Solar Energy, 1980
A one-day meeting on thin film solar cells, held on 7 May 1980 at Imperial College and sponsored by the Thin Films and Surfaces Group of The Institute of Physics, attracted 65 delegates, including a number from the continent. The morning session was concerned with CdS-based cells and began with a review of CdS:Cu2S and ZnCdS:Cu2S cells by R Hill ...
openaire +2 more sources
A one-day meeting on thin film solar cells, held on 7 May 1980 at Imperial College and sponsored by the Thin Films and Surfaces Group of The Institute of Physics, attracted 65 delegates, including a number from the continent. The morning session was concerned with CdS-based cells and began with a review of CdS:Cu2S and ZnCdS:Cu2S cells by R Hill ...
openaire +2 more sources
Thin Solid Films, 2009
Abstract The rapid progress that is being made with inorganic thin-film photovoltaic (PV) technologies, both in the laboratory and in industry, is reviewed. While amorphous silicon based PV modules have been around for more than 20 years, recent industrial developments include the first polycrystalline silicon thin-film solar cells on glass and the ...
openaire +1 more source
Abstract The rapid progress that is being made with inorganic thin-film photovoltaic (PV) technologies, both in the laboratory and in industry, is reviewed. While amorphous silicon based PV modules have been around for more than 20 years, recent industrial developments include the first polycrystalline silicon thin-film solar cells on glass and the ...
openaire +1 more source
2006
Series Preface. Preface. 1. Epitaxial thin-film crystalline Si solar cells on low-cost Si carriers (Jef Poortmans). 2.Crystalline Silicon Thin-Film Solar Cells on Foreign Substrates by High-Temperature Deposition and Recrystallization (Stefan Reber and Thomas Kieliba). 3. Thin-film polycrystalline Si solar cells (Guy Beaucarne and Abdellilah Slaoui). 4.
openaire +1 more source
Series Preface. Preface. 1. Epitaxial thin-film crystalline Si solar cells on low-cost Si carriers (Jef Poortmans). 2.Crystalline Silicon Thin-Film Solar Cells on Foreign Substrates by High-Temperature Deposition and Recrystallization (Stefan Reber and Thomas Kieliba). 3. Thin-film polycrystalline Si solar cells (Guy Beaucarne and Abdellilah Slaoui). 4.
openaire +1 more source
1979 International Electron Devices Meeting, 1979
This paper summarizes the principles which govern selection of semiconductors for thin film solar cells and the current status of thin film cells including their fabrication by vacuum evaporation, sputtering and chemical sprav pyrolysis.
openaire +1 more source
This paper summarizes the principles which govern selection of semiconductors for thin film solar cells and the current status of thin film cells including their fabrication by vacuum evaporation, sputtering and chemical sprav pyrolysis.
openaire +1 more source
1987
Thin-film solar cell technology has settled on three semiconductors: CdTe, CuInSe2 and a-Si:H. Cells with these materials have reached efficiencies above 10%. The commercial adoption of these materials signifies their readiness for near-term applications. Efficiency will remain the technology driver for large-scale, utility applications.
openaire +1 more source
Thin-film solar cell technology has settled on three semiconductors: CdTe, CuInSe2 and a-Si:H. Cells with these materials have reached efficiencies above 10%. The commercial adoption of these materials signifies their readiness for near-term applications. Efficiency will remain the technology driver for large-scale, utility applications.
openaire +1 more source
Numerical studies on a ternary AgInTe2 chalcopyrite thin film solar cell
Heliyon, 2023Jaker Hossain +2 more
exaly
Simulating the performance of a high-efficiency SnS-based dual-heterojunction thin film solar cell
Optical Materials Express, 2021A Kuddus +2 more
exaly