Results 51 to 60 of about 5,328 (140)

Woven Eutectic Lamellar Structures Lead to Ultrahigh Strength and Energy Absorption Capacity in Additively Manufactured Lattice Structures

Small Structures, Volume 6, Issue 5, May 2025.
Herein, AlCoCrFeNi2.1 is selected to produce lattice structures by selective laser melting. The as‐printed lattice structures consist of numerous colonies of nanosized eutectic lamellar structures which are bent and interwind with each other to form a woven microstructure. The unique microstructure leads to unprecedented effective metal strength, yield
Zhiyong Ji, Xingyu Pan, Longlong Wang, Xintian Wang, Xu Chen, Hanwei Fu, Chunlei Qiu   +6 more
wiley   +1 more source

The effects of anodization and instrumentation on titanium abutment surface characteristics and biofilm formation

Journal of Prosthodontics, EarlyView.
Abstract Purpose To assess the impact of anodization and instrumentation on titanium abutment surface characteristics (surface roughness and wettability) and biofilm formation (viability and mass). Materials and Methods Titanium discs were obtained from pre‐milled abutment blanks made of titanium‐6aluminum‐7niobium alloy.
Weiqing Liu, Richard L. Gregory, Chao‐Chieh Yang, Yusuke Hamada, Wei‐Shao Lin   +4 more
wiley   +1 more source

Forging Temperature Effects on Crack Tip Creep Behaviour of Hot Hammer Forged Ti-6Al-4V Alloy

Advances in Materials Science and Engineering, 2023
The creep behaviour of hot hammer forged Ti-6Al-4V alloy under different forging temperatures has an essential influence on their high-temperature service performance.
Xiurong Fang, Yan Liu, Yanru Shao, Huihui Xu, Fuqiang Yang   +4 more
doaj   +1 more source

Nominal material density may not reflect TPS‐relevant density for 3D‐printed surgical reconstruction implants: An educational case study

Journal of Applied Clinical Medical Physics, Volume 27, Issue 8, August 2026.
Abstract Additively manufactured (3D‐printed) surgical reconstruction implants are increasingly encountered in head and neck oncology and may introduce density assignment challenges during radiotherapy treatment planning. This case report describes a clinically significant dosimetric discrepancy arising from the application of nominal bulk material ...
Eric D. Ehler, Shane Edlund, Margaret Reynolds   +2 more
wiley   +1 more source

Evaluation of corrosion behavior of bioceramics coated commercially pure titanium and Ti-6Al-4V alloy

Journal of Baghdad College of Dentistry, 2014
Background: This study report the corrosion behavior of commercially pure titanium and Ti-6Al-4V alloy samples without coating and with hydroxyapatite, partial stabilized zirconia and mixture of partial stabilized zirconia and hydroxyapatite coating and ...
Hanan Ali, Shatha Saleem, Thair L Al-Zubaydi   +2 more
doaj  

Mixing‐Driven Defects and Composition Evolution in Multi‐Material Metal Additive Manufacturing

Advanced Science, Volume 13, Issue 45, 13 August 2026.
Operando synchrotron X‐ray imaging coupled with high‐fidelity multiphysics modeling uncovers how inter‐material mixing reshapes keyhole dynamics and drives distinct pore‐formation pathways in multi‐material laser powder bed fusion (LPBF). Composition‐dependent instabilities trigger defects, whereas rescanning suppresses porosity and homogenizes Cu ...
Zhilang Zhang, Steve Gaudez, Mario Togni, Steven Van Petegem, Markus Bambach, Mamzi Afrasiabi   +5 more
wiley   +1 more source

Eradicating Brittleness of Ti-6Al-4V/Cu Dissimilar Brazed Joint using a Nb Diffusion Barrier [PDF]

Archives of Metallurgy and Materials
Directly brazing titanium (Ti) alloy and copper (Cu) using silver (Ag) based filler alloy has been recognized to be of limited success owing to the embrittlement of intermetallic compounds (IMCs) presented at joint interface. In the current investigation,
F.L. Wang, L. Bai, H. Yin
doaj   +1 more source

Residual Al2O3 From Grit Blasted Components Operate as Third Body Wear Particles in Total Knee Arthroplasty: An Exploratory Study

Journal of Biomedical Materials Research Part B: Applied Biomaterials, Volume 114, Issue 8, August 2026.
ABSTRACT Despite the success of total knee arthroplasty (TKA), a small percentage of devices fail. Due to the high volume of surgeries performed each year, revision total knee arthroplasty surgery presents a burden on patients and surgeons. One aspect that may improve TKA outcomes is device design, specifically the use of grit blasting to increase the ...
Peter W. Kurtz, Bradley Gordon, Charley M. Goodwin, Emma Barnes, Dinghe Liu, Steven M. Kurtz, Nicolas S. Piuzzi, William M. Mihalko, Jeremy L. Gilbert   +8 more
wiley   +1 more source

Strength–Ductility Enhancement in Additively Manufactured Titanium Alloys via Neutral Element‐Mediated Microstructural Control

Rare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT To overcome the challenges of the strength‐ductility trade‐off in laser additively manufactured (LAM) titanium alloys, and to avoid the intragranular microstructure degradation often caused by an exclusive focus on grain equiaxialization, this work proposes a novel strategy of “grain morphology‐intragranular microstructure co‐optimization ...
Kexin Zhao, Wei Su, Zimeng Ye, Hengxin Zhang, Zerong Yu, Kaibo Zhang, Hua Tan, Fengying Zhang, Xin Lin   +8 more
wiley   +1 more source

A Hybrid Compliant–Tendon Laparoscopic Instrument for Distal Articulation and Grasping: Design and Experimental Validation

The International Journal of Medical Robotics and Computer Assisted Surgery, Volume 22, Issue 4, August 2026.
ABSTRACT Background Conventional laparoscopic instruments provide limited dexterity in confined anatomical environments, whereas existing articulated designs rely on complex rigid joints or motorised actuation, increasing mechanical complexity and limiting miniaturisation.
Prabhat Kumar, Bhallamudi Ravi
wiley   +1 more source