Results 61 to 70 of about 14,055 (177)
This work reveals that glass frit chemistry governs acetic‐acid‐induced corrosion and damp‐heat stability in LAF‐processed TOPCon modules. Compared with a Pb/B‐rich frit, a Ba/Zn‐modified frit preserves the Ag–Si interface, suppresses contact‐resistance increase and improves module reliability.
Jiexi Fu +10 more
wiley +1 more source
Microstructure Analysis of Current‐Fired Contacts on TOPCon Layers
We report on the analysis of the microstructure of a current‐fired contact formed by screen printing, drying, and sintering of a silver paste and subsequent laser‐enhanced contact optimization (LECO) for silicon solar cells with tunnel‐oxide passivated contacts (TOPCon) on the TOPCon side.
Johannes M. Greulich +5 more
openaire +1 more source
Numerical simulations were employed to boost industrial TOPCon cells from 25.5% to 26.07% by suppressing J0e,metal,eff without compromising ρc with a dual optimization strategy: (1) engineering the selective emitter sheet resistance (Rsh_SE) to 117 Ω/□ and (2) reducing the LECO‐induced partial metal contact ratio (fpmc) to 1%.
Jiayu Xu +11 more
wiley +1 more source
The article deals with the problem of correct estimation of the rate of rise of the mean sea level punctual. For a single marigraph the propo sed solution consists in co rrecting the measurement of po tential eustatism, which may be inco rrect due to ...
Nicola Perfetti
doaj +2 more sources
Grid Optimization of Tunnel Oxide Passivated Back Contact Silicon Solar Cells
The grid pattern design of tunnel oxide passivated back contact silicon solar cells were optimized via device simulation and the estimated cell efficiency was correlated to the required Ag paste consumption. The absolute efficiency gain of zero‐busbar design over pad‐based contact design is more than 0.1%, with increasing advantage when the Ag paste ...
Pei‐Chieh Hsiao +10 more
wiley +1 more source
Cast-mono silicon material is interesting for its lower carbon footprint compared to Czochralski (Cz) monocrystalline silicon. However, solar cells fabricated using cast-mono (CM) silicon show lower performances.
Bazer-Bachi Barbara +7 more
doaj +1 more source
Abstract Conventional optical coherence tomography (OCT) has a floor effect in patients with severe visual field loss, such as seen in advanced primary open‐angle glaucoma (POAG). OCT angiography (OCTA) does not suffer from such a floor effect. However, which OCTA parameters are most useful for monitoring longitudinal progression is unclear.
Kamya Katarya +5 more
wiley +1 more source
Abstract Purpose To investigate changes in choroidal and retinal thickness before and during myopia control treatment with orthokeratology lenses (OKL) in myopic children. Methods This was a sub‐study of CONTROL and CONTROL2 studies. The present study was a 2‐year, prospective, single‐group interventional study consisting of a 6‐month pre‐treatment ...
P. O. Hansen, F. Møller, T. M. Jakobsen
wiley +1 more source
Hydrosilane Chemistry: From Historic First Steps to Modern Applications
This review covers the history of hydrosilanes, from their initial discovery to their modern applications. It highlights the pioneering work of chemists like Alfred Stock and Franz Fehér and discusses the modern ways of synthesis and use of hydrosilanes in printed electronics.
Uwe Böhme, Maik Gerwig
wiley +1 more source
Testing of the accuracy of Leica TCRP 1201 total stations, Topcon GPT-7001 and Topcon GPT-8203M
The Institute of Geodesy and Mine Surveying VŠB-TU Ostrava bought new total stations – TCRP 1201 made by Leica, GPT- 7001by Topcon and GPT-8303M by Topcon.TCRP 1201 is a motorized total station extended by GPS – SmartStation. GPT 7001 is a total station with a pulse rangefinder.The GPT-8203M motorized total station also has a pulse rangefinder and it ...
Lenka Vlčková +2 more
openaire +1 more source

