Results 51 to 60 of about 5,742 (252)

Research on Transmission Line Vibration Based on the Dynamic Response of Strain in Straight Tower Cross Arm Structure Under Wind–Ice Loads

open access: yesEnergies
Under ice and wind loads, transmission conductors undergo varying degrees of displacement, with larger displacements potentially causing direct damage to the transmission tower–line system and posing serious safety hazards.
Junqi Wang   +7 more
doaj   +1 more source

FE Simulation of Transmission Tower

open access: yesAdvances in Civil Engineering, 2014
The vital components of the transmission line are the electrical transmission towers. They are commonly used to support the phase conductors and shield wires of a transmission line.
Boshra Eltaly, Amen Saka, Kamel Kandil
doaj   +1 more source

Current Status and Challenges in Data Collection for Aerospace Coatings Deposited by Plasma Spraying

open access: yesAdvanced Engineering Materials, EarlyView.
An innovative approach has been integrated into the GRENAT project to optimize plasma spraying and coating performance. Raw materials are accelerated and melted in the plasma generated by torches, creating coatings. Monitoring sensors collect process data which are combined with ex situ characterization data.
Lila Randriamananjara   +8 more
wiley   +1 more source

Impact of First Tower Earthing Resistance on Fast Front Back-Flashover in a 66 kV Transmission System

open access: yesEnergies, 2020
Lightning stroke on a transmission tower structure is one of the major reasons that results in high voltages at the tower arms due to the excessive lightning current flowing through the transmission tower to earth.
Abdullah H. Moselhy   +3 more
doaj   +1 more source

In Situ Micromechanical Study of Bimodal γ′–γ″ Precipitate Assemblies in Ni–Cr–Al–Nb Superalloy

open access: yesAdvanced Engineering Materials, EarlyView.
A Ni–Cr–Al–Nb superalloy with a bimodal γ′–γ″ precipitate distribution is developed. Composite precipitate assemblies form through heterogeneous nucleation, effectively impeding dislocation motion. Micropillar compression reveals high strength at room and elevated temperatures, governed by precipitate shearing, with coupled faulting mechanisms ...
Ujjval Bansal   +4 more
wiley   +1 more source

Study on the Impact of Additional Insulator String Fracture on the Safety Status of Transmission Lines Under Large Ice Loads

open access: yesBuildings
Transmission lines may experience significant ice loads during service, which can cause damage or even destruction to transmission tower components and transmission lines.
Sixiang Zhang   +5 more
doaj   +1 more source

Wind-Induced Coupling Vibration Effects of High-Voltage Transmission Tower-Line Systems

open access: yesShock and Vibration, 2017
A three-dimensional finite element model of a 500 kV high-voltage transmission tower-line coupling system is built using ANSYS software and verified with field-measured data.
Meng Zhang   +3 more
doaj   +1 more source

Advanced Electron Microscopy and Microcomputed Tomography Analysis of Single‐Crystal Ni‐Base Superalloys After Short‐Term Multiaxial Creep

open access: yesAdvanced Engineering Materials, EarlyView.
This work studies the anisotropic behavior of circular notched tensile specimens of Ni‐base superalloy single crystals during high‐temperature tensile creep along [001], [110], and [111]. Correlative scale‐bridging imaging of specimens reveals early rupture along [110] because 1) plastic deformation proceeds faster at notch center; 2) more (brittle ...
Leonardo Agudo Jácome   +6 more
wiley   +1 more source

Re-design and Analysis of 220 KV Multi – Circuit Transmission Tower [PDF]

open access: yesMATEC Web of Conferences
A transmission tower or power tower is a tall structure, typically a steel lattice tower, which is employed to support an overhead power line. Economic losses will be the consequence of any transmission line system failure that disrupts the energy supply.
Sakhale Chandrashekhar   +5 more
doaj   +1 more source

Influence of Scan Strategies in Electron Beam Powder Bed Fusion on Solidification, Microstructure, and High‐Temperature Compressive Properties of γ′‐Strengthened Inconel 738LC

open access: yesAdvanced Engineering Materials, EarlyView.
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati   +11 more
wiley   +1 more source

Home - About - Disclaimer - Privacy