Results 1 to 10 of about 507,290 (301)

YAGG:Ce transparent ceramics with high luminous efficiency for solid-state lighting application

open access: yesJournal of Advanced Ceramics, 2019
A series of Y2.985Al5–x Ga x O12:0.015Ce (YAGG:Ce, x = 0, 1, 2, 3, 4, 5) transparent ceramics were prepared via a solid-state reaction method. Two-step sintering technique was proved to be an effective approach to prepare functional ceramics with high Ga
Jun Jiang, Hezhu Shao
exaly   +4 more sources

Recent development of A2B2O7 system transparent ceramics

open access: yesJournal of Advanced Ceramics, 2018
A2B2O7 system compounds, which usually present three phase structures mainly based on the ionic radius ratios of r A and r B (r A/r B), have been studied for potential applications in many fields, such as thermal barrier coatings, luminescence powders ...
Danyu Jiang, Zhengjuan Wang
exaly   +4 more sources

Transparent Glass Ceramics [PDF]

open access: yesCrystals, 2021
In the past few decades, glass ceramic (GC) has revolutionized the application of glass [...]
Shiv Prakash Singh, Atul D. Sontakke
doaj   +2 more sources

Fine-Grained Tb3Al5O12 Transparent Ceramics Prepared by Co-Precipitation Synthesis and Two-Step Sintering

open access: yesMagnetochemistry, 2023
In recent years, transparent terbium aluminum garnet (TAG) ceramics have attracted much attention for use in high-power Faraday isolators. Fine-grained ceramics usually possess better mechanical properties and accordingly better service performance.
Lixuan Zhang   +10 more
doaj   +1 more source

Composition and luminescence properties of highly robust green-emitting LuAG:Ce/Al2O3 composite phosphor ceramics for high-power solid-state lighting

open access: yesJournal of Advanced Ceramics, 2023
The major advantage of laser lighting over white light-emitting-diode is the possibility to achieve ultra-high luminance. However, phosphors usually suffer laser-induced luminescence saturation, which limits the peak luminance of laser lighting devices ...
Ziqiu Cheng   +10 more
doaj   +1 more source

Growth and Characterization of Ce-Doped Luag Single Crystal Fibers from Transparent Ceramics by Laser-Heated Pedestal Method

open access: yesCrystals, 2021
Scintillation single crystal fibers (SCFs) have great potential applications in the new generation of high-energy ray and particle detectors due to their morphological advantages.
Yun Dai   +6 more
doaj   +1 more source

Terbium (III) Oxide (Tb2O3) Transparent Ceramics by Two-Step Sintering from Precipitated Powder

open access: yesMagnetochemistry, 2022
As a result of preliminary air calcination and subsequent reduction in a flowing NH3 atmosphere of the precursor from the liquid precipitation method for the first time, pure-phase Tb2O3 powder with an average particle size of 135 nm was prepared.
Dianjun Hu   +8 more
doaj   +1 more source

Pressureless Sintering of YIG Ceramics from Coprecipitated Nanopowders

open access: yesMagnetochemistry, 2021
Nanoparticles prepared by the coprecipitation method were used as raw materials to fabricate Y3Fe5O12 (YIG) ceramics by air pressureless sintering. The synthesized YIG precursor was calcinated at 900–1100 °C for 4 h in air.
Yimin Yang   +9 more
doaj   +1 more source

Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics

open access: yesJournal of Advanced Ceramics, 2022
Fine grained 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics with high optical and mechanical properties were fabricated by air pre-sintering and hot isostatic pressing (HIP) using commercial 8YSZ powders as the raw material.
Penghui Chen   +7 more
doaj   +1 more source

A review on magneto-optical ceramics for Faraday isolators

open access: yesJournal of Advanced Ceramics, 2023
As a promising magneto-optical (MO) material applied in Faraday isolators, magneto-optical ceramics possess excellent comprehensive properties and have attracted much attention these years.
Lixuan Zhang   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy