Results 1 to 10 of about 3,911 (217)
CFD analysis of the impact of air gap width on Trombe wall performance
Abstract In recent years, there has been a lot of research and debate on how solar energy can be used instead of conventional sources of heating to power residential heating. In this study, the Trombe wall (TW) technique, based on natural convection and energy storage, was examined to predict mass flow rate, temperature field, and velocity field for ...
Khaoula Friji +4 more
wiley +1 more source
Enhancing the energy efficiency of building envelopes is one of the key strategies for energy conservation and reducing consumption in buildings. This study employs numerical research methods to explore the impact of crucial factors such as solar cell ...
Qiang Gao +6 more
doaj +1 more source
The mass flow rate and Rayleigh number has been investigated experimentally on the passive solar using Trombe wall consist of (industrial wax) used as phase change material (PCM).
Ehsan F. Abbas, Shayma A. Azat
doaj +3 more sources
Optimum Trombe wall thickness in the Mediterranean Tunisian context: An energetic and economic study
Trombe walls figure among many passive devices used in the Mediterranean climate to minimize heating demands in residential buildings. The thickness of this massive wall is a critical parameter that influences the effectiveness of the system ...
Fakhreddine Abbassi +2 more
doaj +1 more source
Simulation of a full scale Trombe wall system [PDF]
Two dimensional transient modelling of the flow and heat transfer in an idealized Trombe wall system was performed for a fixed set of physical dimensions. The governing equations were solved using multiphysics software. Buoyancy and thermal accumulation in a brick wall are the main effects considered.
R. L. Frederick, F. Acuña
openaire +1 more source
Steps of shape memory polymer composites matrix‐phase material selection. Abstract In the present study, the selection of suitable shape memory polymers (SMPs) to be used as the matrix‐phase material with various (In)organic filler materials to achieve the required optimum multi‐stimuli response in shape memory polymer composites (SMPC) systems is ...
Geoffrey Barongo Omosa +4 more
wiley +1 more source
A method and radiative cooling device for use in passively cooling spaces is described. It is applicable to any level of thermal radiation in vacuum and to high-intensity thermal radiation in non-vacuum environments.
Garcia, R. D., Petrick, S. W.
core +1 more source
Selective Internal Heat Distribution in Modified Trombe Wall
At present, the requirements for thermal insulation of the external walls in buildings are being increased. There is a need to reduce energy consumption for heating rooms during the winter season. This may be achieved by increasing the thermal resistance of the outer partitions, using solutions that utilize either recuperation or solar radiation.
Jerzy Szyszka +3 more
openaire +1 more source
Theoretical analysis and numerical study of natural convection inside combined solar chimney
Theoretical analysis and numerical study of natural convection inside combined solar chimney. Abstract Solar chimneys may induce natural ventilation through solar radiation. However, sufficient theoretical studies are needed as a basis to fully exploit passive design in practical green building design.
Huimin Cui +5 more
wiley +1 more source
Solar Decathlon Latin America and Caribbean: Comfort and the Balance between Passive and Active Design [PDF]
This article contains an overall analysis of the results obtained by the four highest scoring teams in the Solar Decathlon Latin America and Caribbean 2015 collegiate sustainable habitat competition. Considering that the prototypes developed were based
Herrera-Limones, Rafael +2 more
core +1 more source

