Results 71 to 80 of about 1,939 (192)

Flexural performance of concrete‐filled steel tubular beams with wood chip aggregate

Structural Concrete, EarlyView.
Abstract This study investigates the flexural performance of concrete‐filled steel tubular (CFST) beams with partial replacement of aggregates by wood chips (0%–25%) through experimental and numerical analysis. This study is novel in that it experimentally and numerically investigates the flexural behavior of CFST beams with partial replacement of ...
Mizan Ahmed, Mohamed Emara, Vipulkumar Ishvarbhai Patel, Wensu Chen, Xihong Zhang, Faiz Shaikh, Ahmed Hamoda   +6 more
wiley   +1 more source

Mechanics‐based model for cold joints in reinforced concrete members

Structural Concrete, EarlyView.
Abstract This study introduces a mechanics‐based numerical model to characterize the behavior of cold joints in reinforced concrete members subjected to monotonic loading. The model incorporates mechanisms such as interface slip and opening, aggregate interlock, clamping force, and dowel action of the reinforcing bars crossing the interface.
Brandon Li, Hwa‐Ching Wang, Oguzhan Bayrak, Anca C. Ferche   +3 more
wiley   +1 more source

Bending Performance of Prestressed Concrete Composite Girder Bridge with Steel Truss Webs

工程科学与技术, 2022
To study the flexural behavior of prestressed concrete (PC) composite girder bridge with truss webs, the model test of PC composite girder bridge with truss webs for the flexural behavior was conducted.
Kangming CHEN, Jianping LUO, Qingxiong WU, Baochun CHEN, Fenfang CAI   +4 more
doaj  

Pre‐failure behavior of continuous post‐tensioned and post‐grouted beam in case of tendon failure

Structural Concrete, EarlyView.
Abstract Grouted tendons are a common solution for long‐span bridge structures. The grout provides bond and corrosion protection for prestressing steel. However, if the grouting is defective, corrosion of the prestressing steel may initiate and eventually lead to tendon failure.
Olli Asp, Joonas Tulonen, Anssi Laaksonen   +2 more
wiley   +1 more source

Experimental and design‐oriented research on fiber reinforced concrete segmental tunnel linings: A systematic review

Structural Concrete, EarlyView.
Abstract The use of fiber reinforced concrete (FRC) in precast tunnel segments is among the most established and representative applications of this material. Over the past two decades, numerous tunnel linings were constructed with partial or total substitution of conventional steel reinforcement by fibers, this yielding to quantifiable benefits in ...
Vladimir Rusanov, Stanislav Aidarov, Pablo Pujadas, Tai Ikumi, Albert de la Fuente   +4 more
wiley   +1 more source

Optimal structural design method for reinforced concrete column in buildings with high floor heights using a genetic algorithm

Structural Concrete, EarlyView.
Abstract Globally, there is a growing trend toward taller, larger, and more structurally diverse buildings that require expansive interior spaces. Rapid technological advancements have surged the demand for data centers, while the expansion of e‐commerce has increased logistics volumes, driving the need for large‐scale warehouses.
Han Yong Lee, Byeung‐Kuy Jung, Byung Kwan Oh   +2 more
wiley   +1 more source

TRM‐to‐concrete interface bond without anchors: Combined experimental, analytical, and numerical modeling approach

Structural Concrete, EarlyView.
Abstract Textile reinforced mortar (TRM) systems have emerged as an effective alternative to conventional FRP strengthening solutions due to their compatibility with concrete substrates and favorable performance under adverse environmental conditions.
Ömer Mercimek, Özlem Çalışkan, Özgür Anıl, R. Tuğrul Erdem, Murat Yüncüler   +4 more
wiley   +1 more source

Flexural performance of basalt FRP reinforced concrete beams with and without discrete basalt fibers

Discover Civil Engineering
Steel corrosion in reinforced concrete has driven the search for alternative materials. This study investigates the flexural behavior of Basalt Fiber Reinforced Polymer (BFRP) reinforced concrete (RC) beams, including the effect of basalt fibers on crack
Kacharla Sunil Kumar R, Kishore Ravande
doaj   +1 more source

Flexural Behavior of Beams Reinforced with Steel Bars Exceeding the Nominal Yield Strength

Latin American Journal of Solids and Structures
If steel manufactures usually comply with the minimum code specifications, the nominal yield strength of rebar can however be significantly exceeded in many countries, depending on the steel manufacturing processes. Such an increase in yield strength can
Abdelhamid Charif, Shehab M. Mourad, M. Iqbal Khan   +2 more
doaj   +1 more source

Split‐disk testing of precast ultra‐high performance fiber‐reinforced concrete tubes

Structural Concrete, EarlyView.
Abstract Ultra‐high performance fiber‐reinforced concrete (UHPFRC) has great potential for structural applications involving precast cylindrical shapes, including pipes, silos and stay‐in‐place forms for concrete columns. This study examines the performance of UHPFRC rings under internal pressure simulated using the split‐disk loading method, along ...
Mina Fakeh, Amir Fam
wiley   +1 more source