Results 51 to 60 of about 47,435 (267)

Low‐Cost, Large‐Scale Nanoporous Metals by Mechanical Alloying, Oxide Reduction, and Dealloying of Powders

Advanced Engineering Materials, EarlyView.
Powder metal processing provides scalable advantages in nanoporous (np) metal development. Mechanical alloying is used to produce unique precursors for hybrid nanopore formation by oxide reduction and dealloying. As demonstrated in np Ag, this approach improves process efficiency while promoting smaller ligaments and larger pores, both of which are ...
Mark A. Atwater, Oliver A. Fowler
wiley   +1 more source

A low cost solid state pulsed system for ultrasonic velocity and absorption measurement

Archives of Acoustics, 2015
An instrument is described to generate and detect pulsed ultrasonics. The instrument should be useful for ultrasonic measurements in gases for teaching laboratories and for research purpose because of its low cost and ease of construction.
P. K. AGNIHOTRI, C. S. ADGAONKAR, C. Y. BEDARE   +2 more
doaj  

Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment

Advanced Engineering Materials, EarlyView.
The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin, Samson Dare Oguntuyi, Peter Apata Olubambi   +2 more
wiley   +1 more source

Applications of ultrasonic devices for perfection of cutting processes of materials in machines of light industry

Trudy Odesskogo Politehničeskogo Universiteta, 2014
The prospect of using ultrasonic devices is presented for intensification of technological processes of cutting and pricking of fabrics, artificial and natural leathers with imposition of ultrasonic vibrations on the instrument.
Аль-Яфаї Наср, Г.Б. Параска, В.П. Місяць   +2 more
doaj  

Characterization of Aluminized Layers on Inconel‐738 Alloy: Microstructure, Modeling of Aluminizing Kinetics, and Thermal Behavior

Advanced Engineering Materials, EarlyView.
This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe, Tuba Yener, Suayb Cagri Yener, Mourad Keddam, Cuma Bindal   +4 more
wiley   +1 more source

COMPLEX PERFORMANCE ANALYSIS OF MEDICAL INSTRUMENT ULTRASONIC MACHINING

Advanced Engineering Research, 2010
Research results of the ultrasonic surface decontamination of the medical instrument in the complex with the structural material transformations occurring under the influence of ultrasonic vibrations are presented.
Irina K. TSYBRIY, Elena V. VYAKHIREVA, Irina S. KUKHARENKO   +2 more
doaj  

A Compact Spin‐Coated Graphene UWB Antenna for Breast Tumor Detection

Advanced Engineering Materials, EarlyView.
A compact, spin‐coated graphene ultra‐wideband patch antenna designed for breast tumor detection, capable of distinguishing between malignant and benign tumors. This innovative antenna can serve as an effective initial screening tool, particularly in resource‐limited settings such as rural areas, where access to advanced medical equipment like MRI and ...
Raja Rashidul Hasan, Shuvra Saha, Sumit Hassan Eshan, Rinku Basak, Md. Nahian Al Subri Ivan, Ahmed Murtuza Saleque, Raja Tariqul Hasan Tusher, Sadia Zabin, Md. Abdur Rahman, Yuen Hong Tsang   +9 more
wiley   +1 more source

COMPLEX PERFORMANCE ANALYSIS OF MEDICAL INSTRUMENT ULTRASONIC MACHINING

Вестник Донского государственного технического университета, 2018
Research results of the ultrasonic surface decontamination of the medical instrument in the complex with the structural material transformations occurring under the influence of ultrasonic vibrations are presented.
Irina K. TSYBRIY, Elena V. VYAKHIREVA, Irina S. KUKHARENKO   +2 more
doaj  

The Digital Ultrasonic Instrument

, 1983
In order to provide a capability for performing advanced signal processing on ultrasonic and acoustic emission signals at speeds that are sufficient for practical applications, a high speed Digital Ultrasonic Instrument (DUI) has been developed. The DUI performs its processing entirely digitally and therefore can do the phase- and frequency-sensitive ...
openaire   +3 more sources

Microstructural Evolution and Vacancy Defect Formation in Mn–Mo–Ni RPV Steel Under Low Cycle Fatigue: Insights From EBSD and PALS

Advanced Engineering Materials, EarlyView.
Low‐cycle fatigue damage in Mn–Mo–Ni reactor pressure vessel steel is examined using a combined electron backscatter diffraction and positron annihilation lifetime spectroscopy approach. The study correlates texture evolution, dislocation substructure development, and vacancy‐type defect formation across uniform, necked, and fracture regions, providing
Apu Sarkar, Dhanadeep Dutta, G. Bharat Reddy   +2 more
wiley   +1 more source