Dataset from the dynamic shake-table experiments on a full-scale unreinforced clay-brick masonry building with chimneys [PDF]
This data paper outlines detailed information on the acquisition and use of sensor measurements from shake-table experiments on a full-scale unreinforced masonry building.
Stylianos Kallioras +4 more
doaj +2 more sources
Numerical Simulation of Unreinforced Masonry Buildings with Timber Diaphragms
Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the effect of the connections between floors and walls is rarely discussed or explicitly modelled when simulating the response of such buildings.
Igor Tomić +3 more
doaj +2 more sources
Seismic assessment of unreinforced masonry façades from images using macroelement-based modeling [PDF]
Despite the variability of urban infrastructure, unreinforced masonry buildings remain globally prevalent. Constructed from brick, hollow concrete blocks, stone, or other masonry materials, these structures account for a significant proportion of ...
Mayar Ariss +4 more
doaj +2 more sources
Seismic Performance of Retrofitted Masonry Building Considering Soil-Foundation-Structure Interaction [PDF]
Around the world, many unreinforced masonry buildings have been constructed for different usages, such as schools. Studies have shown the seismic vulnerability of these buildings.
Parisa Sartaji +1 more
doaj +1 more source
The in-plane seismic performance of old unreinforced brick masonry walls strengthened with stainless-steel twisted bars and conventional steel bars (usually used in concrete reinforcing) was investigated in the present study. For this purpose, a total of
Armando Demaj +3 more
doaj +1 more source
Experimental study on compressive strength of Interlocking Hollow Block System (IHBS) using fly ash [PDF]
Interlocking Hollow Block System (IHBS) is a reasonable solution for conventional block masonry due to its structural ability and building capability.
Kepli Muizzatun Nasirah +5 more
doaj +1 more source
Assessment of Selected Models for FRP-Retrofitted URM Walls under In-Plane Loads
One way to improve a structure’s total load-bearing capacity during an earthquake is to apply fiber-reinforced polymers (FRP) to unreinforced walls. The study discusses the use of FRP to strengthen unreinforced masonry (URM) structures.
Marijana Hadzima-Nyarko +3 more
doaj +1 more source
Towards Performance-Based Design of Masonry Buildings: Literature Review
Masonry is among the most widely used construction materials around the world. Contemporary masonry buildings are primarily designed to comply with prescriptive building code regulations.
Bowen Zeng, Yong Li
doaj +1 more source
Out‐of‐plane reinforcement of masonry walls using joint-embedded steel cables [PDF]
The out-of-plane mechanism (rocking) of walls often causes fatalities and collapses of historic buildings during earthquakes. This paper addresses the problem of assessing the seismic resistance of walls subjected to out-of-plane bending, before and ...
Bisciotti, Giordano +2 more
core +2 more sources
This research presents a comprehensive nonlinear quasi-static seismic assessment of an unreinforced rubble masonry building, Bytown Museum in Ottawa, Canada, using discontinuum-based analyses.
Elyse Hamp +4 more
doaj +1 more source

