Results 21 to 30 of about 679,632 (213)

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins [PDF]

open access: yes, 2015
Maritime pine (Pinus pinaster) sawdust was used to produce liquefied wood by the polyhydric method with acid catalysis. The process was optimized to produce the highest amount of liquefied wood. Wood liquefied at 160ºC for 90 min was used in the adhesion
Vicente,José   +12 more
core   +1 more source

Effect of Boron Compounds on Properties of Chinese Fir Wood Treated with PMUF Resin

open access: yesJournal of Bioresources and Bioproducts, 2019
Plantation Chinese fir wood was modified by low molecular weight phenol melamine urea formaldehyde (PMUF) resin and boron compounds (BB) through a progressive gradual infiltration process.
Fei Wang, Junliang Liu, Wenhua Lyu
doaj   +1 more source

Determination of Free Urea in Fertilizers Containing Urea Formaldehyde Polymers

open access: yesJournal of AOAC INTERNATIONAL, 1977
Abstract This report describes a method for determining free, unreacted urea nitrogen in mixed compounds containing condensation products of urea and formaldehyde by using an ammonia gas-sensing electrode. Free urea is determined by potentiometrically measuring the ammonia produced following exhaustive hydrolysis by urease and ...
Diego Canepa, Andrea Barbera
openaire   +1 more source

Effects of urea formaldehyde condensation polymer treatment of flaxseed on ruminal digestion and lactation in dairy cows [PDF]

open access: yesJournal of Dairy Science, 2013
Flaxseed is a potent source of the n-3 fatty acid α-linolenic acid (ALA), yet most ALA is lost during ruminal biohydrogenation when ground flaxseed is fed to ruminants. Heat processing and urea formaldehyde condensation polymer (UFCP) treatment of flaxseed were investigated as possible means of protecting ALA from ruminal degradation.
A, Hawkins   +8 more
openaire   +2 more sources

Thermoplastic polymers in the production of plywood products: advantages, opportunities and perspectives for application

open access: yesНаукові праці Лісівничої академії наук України, 2018
One of the main adhesives used in the production of plywood are urea – and phenol-formaldehyde adhesives. In spite of their many positive charac-teristics such adhesives are toxic.
Pavlo Bekhta, Iryna Kusniak
doaj   +1 more source

Urea-Formaldehyde Strengthened by Polyvinyl Alcohol: Impact on Mulch Film Properties and Cucumber Cultivation. [PDF]

open access: yesPolymers (Basel)
To address the problem of environmental pollution caused by the extensive use of low-density polyethylene (LDPE) mulch film, this study developed a novel sprayable mulch using natural fibers and biodegradable polymers. Urea–formaldehyde resin (UF),
Shen T, Ma Y, Zhang X.
europepmc   +2 more sources

2,4-Dihydroxybenzaldehydeoxime-Urea-Formaldehyde Polymer as a Polymeric Ligand

open access: yes, 1995
Department of Chemistry, Sardar Patel University, Vallabh Vidyanagar-388 120 Manuscript received 2 November 1993, accepted 20 January 1994 2,4-Dihydroxybenzaldehydeoxime-Urea-Formaldehyde Polymer as a Polymeric ...
M. M. PATEL, G. C. PATEL, H. B. PANCHOU
openaire   +1 more source

Green fertilizer: binder from chitosan, natural rubber & lignin [PDF]

open access: yes, 2023
Chitosan, natural rubber and calcium lignosulfonate from lignin can be manipulated to replace formaldehyde in synthetic urea-formaldehyde fertilizer for slow release. Formaldehyde is highly toxic and can trigger the need for green fertilizers.
Mohamad Juoi, Jariah   +2 more
core   +1 more source

Molar-mass distribution of urea–formaldehyde resins of different degrees of polymerisation by MALDI-TOF mass spectrometry [PDF]

open access: yesJournal of the Serbian Chemical Society, 2010
This paper describes some results obtained in an investigation of urea–formaldehyde (UF) resins of different degrees of polymerisation by matrix-assisted laser desorption/ionisation time-of-flight (MALDI-TOF) mass spectrometry (MS).
IVANA GAVRILOVIĆ-GRMUŠA   +3 more
doaj  

Characterization of the crystalline regions of cured urea formaldehyde resin

open access: yes, 2017
Urea formaldehyde (UF) resins are widely used thermosetting polymers in adhesives, finishes, molded objects,etc.
Ming Liu   +3 more
core   +1 more source

Home - About - Disclaimer - Privacy