Results 21 to 30 of about 88,324 (290)
The effect of temperature on phase transformation, metallization rate, carbon residue and agglomeration of metal Fe after the pre-reduction of carbon-containing pellets in high-chromium vanadium–titanium magnetite (HCVTM) was investigated.
Zhu Kui-song +7 more
doaj +1 more source
This is a paper in the field of mineral processing engineering. The mineral characteristics of a vanadium titanium iron concentrate sample from Panxi were studied using sieve analysis, polarizing microscope, X-ray diffractometer, Zeiss Sigma 500 scanning
Fulin Chen +4 more
doaj +1 more source
Titanium (Ti) and its alloys are the most commonly used materials for bone implants. However, implant failure often happens due to bacterial infection. Developing antibacterial coatings on Ti implants is an effective strategy.
Hao Zhang +10 more
doaj +1 more source
Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates [PDF]
The composition of the sub-15 nm particles in six related vanadium high strength low alloy steels, made by simulated thin slab direct charged casting, has been determined using electron energy loss spectroscopy (EELS). Such particles are considered to be
Baker, T.N. +3 more
core +4 more sources
The viscous flow of CaO–SiO2–Al2O3–MgO–TiO2–Cr2O3 slag (CaO/SiO2 = 1.1, Cr2O3 = 0.5 mass%) were investigated to promote understanding of the effect of TiO2 addition on the viscous behavior of chromium-containing vanadium-titanium blast furnace slag.
Ding Yang +8 more
doaj +1 more source
Effect of VC additions on the microstructure and mechanical properties of TiC-based cermets
VC is important carbide additive and has a similar crystal structure with TiC. In this study, the effect of adding VC amounts at content levels of 1–8 wt% on the microstructure evolution and mechanical properties of TiC-based cermets is examined.
Min Chen +3 more
doaj +1 more source
Using carbon foam (CF) as supporting materials, paraffin (PW), palmitic acid (PA) and stearic acid (SA) as phase change main materials and Panzhihua vanadium tailings (VT) as thermal conductivity enhancer, vanadium tailings/carbon foam/organic composite ...
Zhong XU +5 more
doaj +1 more source
The response surface methodology of Box Behnken design was used to investigate the effects of hydrothermal conditions on the high purity TiO2 preparation from industrial metatitanic acid.
Congxue Tian
doaj +1 more source
Single-phase body-centered cubic (BCC) lightweight Ti–V–Nb–Zrx solid-solution alloys were fabricated by reducing the Zr concentration within the range of 0–5 at% to improve the mechanical properties of equimolar TiVNbZr alloy at elevated temperatures ...
Yan Jiang +7 more
doaj +1 more source

