Results 41 to 50 of about 6,265 (301)
Processes, microstructure and properties of vanadium microalloyed steels
Vanadium as an important alloying element in steels was initially associated with the properties achieved following tempering. Interest in the microstructure was stimulated by the advent of transmission electron microscopes with a resolution of ~1nm ...
Baker, T.N., T. N. Baker
core +1 more source
Solidification of Fe19Cr2.9C2V alloy [PDF]
The addition of 2% V affects the solidification process and changes the transformation characteristics of austenite in hypoeutectic white cast iron containing 19% Cr and 2.9% C.
Filipović Mirjana +2 more
doaj +1 more source
The paper presents the experimental studies to determine the corrosion compatibility of various base materials of the capillary-porous structures (CPS) with a liquid tin-lithium alloy under high temperatures.
Irina Tazhibayeva +9 more
doaj +1 more source
The composition of the sub-15 nm particles in six related vanadium high strength low alloy steels, made by simulated thin slab direct charged casting, has been determined using electron energy loss spectroscopy (EELS). Such particles are considered to be
Baker, TN +7 more
core +1 more source
Helium retention and surface morphology of oxidized vanadium alloy [PDF]
The effects of the surface oxidation on the helium desorption and retention behaviors of vanadium alloy were investigated. V-4Cr-4Ti alloy, which was thermally oxidized at 873 K for 15 minutes with 0.05 Pa, was irradiated by helium ions with energy of 5 ...
Y. Nobuta +13 more
core +1 more source
Development and Application of Low Cost Binder for Iron Enriched Sludge
This is an article in the field of mining engineering. Aiming at problems of high cost and high comminution rate in the iron enriched sludge pelletizing process, a new kind of low cost binder was developed.
Jianling QI +5 more
doaj +1 more source
Corrosion Behavior of Ti-6Al-7Nb Alloy in Biological Solution for Dentistry Applications
The corrosion behavior of titanium alloy without vanadium Ti-6Al-7Nb under simulated biological conditions was investigated and compared with that of titanium and Ti-6Al-4V alloy, which employed as biomaterials.
N.A. Al-Mobarak +2 more
doaj +1 more source
The role of zirconium in microalloyed steels
Recently there has been a renewed interest in the addition of zirconium to microalloyed steels. It has been used since the early 1920's, but has never been universally employed, as have niobium, titanium or vanadium.
Baker, Neville
core +1 more source
Effect of Vanadium addition on The Structural Properties of Alloy (Ni-Cu) Nano-Particles
This research aimed to prepare (Ni-Al) alloys by powder technology method because of it is technological and commercial important. Nickel and Copper powders were tacking then there powders mixed and blended together with percent (Ni-30% Cu), Vanadium ...
Omar Fadhil Abdullah
doaj +1 more source
In this study, molecular dynamics simulations were employed to study the interaction between dislocations with Fe-V precipitate with different vanadium concentrations.
Sepehr Yazdani +2 more
doaj +1 more source

