Results 41 to 50 of about 724,235 (283)
Simulation of a simple vapour-compression refrigeration system using R134a [PDF]
A computerized simulation of a simple single-stage vapour-compression refrigeration system has been made. The steady-state simulation uses the accurate property correlations developed by Cleland for refrigerant R134a.
Anis Amalina
core +2 more sources
Energy Saving for Batch Distillation with Mechanical Heat Pumps
Operational and economic feasibility of different heat-pump systems with mechanical compression integrated to real batch distillation columns are investigated. This study is focused to the reduction of the external energy demand of the batch distillation.
G. Modla, P. Lang
doaj +1 more source
The efficiency of R600a, an eco-friendly refrigerant with TiO2, Al2O3, and SiO2 nanolubricants, was investigated and evaluated as a substitute for R134a in a vapour compression refrigerator system.
T.O. Babarinde, D.M. Madyira
doaj +1 more source
A combined experimental–computational framework identifies energy‐dependent laser absorptivity for NiTi in laser powder‐bed fusion, applicable to conduction and transition modes. Single‐track experiments and thermofluid smoothed particle hydrodynamics simulations are coupled through inverse analysis of melt pool geometry.
Mohamadreza Afrasiabi +3 more
wiley +1 more source
This paper experimentally investigates the direct integration of 3.15 kg of phase change materials (PCM) into a standard vapour compression system of variable cooling capacity, through an innovative lab-scale refrigerant-PCM-water heat exchanger (RPW-HEX)
Boniface Dominick Mselle +4 more
doaj +1 more source
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig +2 more
wiley +1 more source
Rapid urbanization, global warming and enhanced quality of life have significantly increased the demand of indoor thermal comfort and air conditioning systems are not a luxury anymore, but a necessity.
Sajid Mehmood +3 more
doaj +1 more source
Vapour sensing applications and electrical conduction mechanisms of a novel metal-polymer composite [PDF]
A novel metal-polymer composite is presented, comprised of a micron-sized nickel powder dispersed within a silicone polymer matrix. The composite is intrinsically electrically insulating, but displays a dramatic increase in conductivity under compression,
Hands, Philip James Walton +1 more
core
Near‐surface deuterium enrichment profiles for different microstructural types of TiAl after exposure at 700 °C in a heavy water‐containing environment. The deuterium levels are significantly higher than expected from natural occurrence, indicating that the heavy water dissociated during the exposure treatment and entered the specimens.
Jonathan D. H. Paul +5 more
wiley +1 more source
Vapour compression refrigeration systems (VCRS) are used for cooling and preservation. Hydrochlorofluorocarbons (HCFC) and chlorofluorocarbon (CFC) commonly used as refrigerants have been phased out due to their negative impact on human and the ...
M. Ogbonnaya, O. O. Ajayi, M. A. Waheed
doaj

