Results 71 to 80 of about 2,664 (220)
Fabrication and electrical characteristics of flash-sintered SiO2-doped ZnO-Bi2O3-MnO2 varistors
The dense ZnO-Bi2O3-MnO2-xSiO2 (ZBMS) varistors for x = 0, 1, 2, 3 wt% were fabricated by flash sintering method under the low temperature of 850 °C within 2 min. The sample temperature was estimated by a black body radiation model in the flash sintering
Pai Peng +7 more
doaj +1 more source
Simulation‐Based Material Design for HVDC Cable Accessories
ABSTRACT The worldwide increasing demand for electricity, coupled with the need for more reliable infrastructures and more interconnected networks, has put forward high voltage direct current (HVDC) technologies for energy transmissions. Questions still arise as regards synthetic insulation for cable systems and accessories, as it remains one of the ...
Thi Thu Nga Vu +2 more
wiley +1 more source
This work presents the most relevant aspects of the SNO2 based varistors technology and a comparative study of its non linear behavior in relation to ZnO (modified Matsuoka system) varistors.
Longo, E. [UNESP] +13 more
core +1 more source
Structure of a Novel Spinel Li0.5Zn5/3Sb2.5/3O4 by Neutron and Synchrotron Diffraction Analysis
Zn7/3Sb2/3O4 is a secondary phase in ZnO-based varistors. Acceptor impurities, such as Li+, increase the resistivity. This effect is produced by a modification of the grain boundary barriers.
José Alfredo Marín-Romero +4 more
doaj +1 more source
ABSTRACT With the development of deep‐sea wind power and large‐scale onshore clean energy, the global demand for higher voltage level DC cable power transmission technology has become increasingly urgent. This paper systematically reviews the technical advancements in high voltage direct current (HVDC) cable accessories, addressing design challenges of
Zongxi Liu +5 more
wiley +1 more source
Electrical and microstructural characterization of doped ZnO based multilayer varistors
Purpose The purpose of this study was to develop fabrication procedure of multilayer varistors based on doped ZnO and to investigate their microstructure and electrical properties.
Jan Kulawik +2 more
core +1 more source
Current localization, non-uniform heating, and failures of ZnO varistors [PDF]
Metal oxide varistors have highly nonlinear electrical characteristics and are widely used as devices for over-voltage protection. Varistor applications range from the use of small varistors to protect delicate electronic components to the use of much ...
Bartkowiak, M., M. Bartkowiak
core +1 more source
Optimization of the sintering process: metal matrix composites and zinc oxide varistors [PDF]
The sintering process of Metal Matrix Composites and Ceramic Varistors has been studied in this project. Metal Matrix Composites of A1/A1203 and Al-6061/SiC and ceramic ZnO varistors were manufactured through compaction and sintering process.
Huda, Mohammad Durul
core +1 more source
The abnormal expansion associated with the simultaneous synthesis and sintering of Zn2SnO4 from ZnO and SnO2 is due to the reaction mechanism and correlated with the conversion. This phenomenon opens the way to manufacture porous ceramics without the addition of pore generators, simplifying the process, and especially the thermal treatment.
María José Orts +3 more
wiley +1 more source
ZnO varistors doped with Y2O3, Bi2O3, and Co2O3 were analyzed for electrical performance, microstructure, phase composition, and elemental distribution using electrical performance testing, scanning electron microscopy, X‐ray diffraction, and energy ...
Zhengzheng Fu +7 more
doaj +1 more source

