Results 151 to 160 of about 250,447 (236)

Assessing the influence of titanium dioxide nanotubes incorporation on thermal and thermomechanical characteristics of 3D‐printed denture base resin

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aims to evaluate the effects of adding titanium dioxide (TiO2) nanotubes (NTs) to three‐dimensional (3D) printed denture base resin on the thermal and thermomechanical properties, which have high clinical relevance. Materials and Methods TiO2 NTs with dimensions of 30–70 nm in diameter and 2–4 µm in length were added to the ...
Zaid Basil Al‐enbary, Ihab Nabeel Safi, Julfikar Haider   +2 more
wiley   +1 more source

The Application of Vat Polymerization Technique for Work Piece Fabrication

International Journal of Mechanical and Production Engineering Research and Development, 2021
openaire   +1 more source

Impact of monomer contamination of isopropanol during post‐rinsing on the accuracy of dental models fabricated by vat photopolymerization

Journal of Prosthodontics, EarlyView.
Abstract Purpose The aim of this study was to investigate the impact of an increasing level of monomer contamination of isopropanol (isopropyl alcohol [IPA]) during post‐rinsing on the dimensional stability of test samples produced by vat photopolymerization.
Florian Flierl, Benedikt C. Spies, Severin Rothlauf, Kirstin Vach, Ralf J. Kohal, Jörg Lüchtenborg   +5 more
wiley   +1 more source

Additively manufactured water‐washable resin dies cleaned with nonhazardous solutions: Can dimensional and positional trueness be ensured?

Journal of Prosthodontics, EarlyView.
Abstract Purpose The purpose of this in vitro study was to evaluate the dimensional and positional trueness of additively manufactured (AM) removable dies in water‐washable (WW) resins and cleaned using different post‐processing solutions (98% isopropyl alcohol [IPA], methyl ether solvent [MES], and water).
André Peter Seifert, Pedro Molinero‐Mourelle, Gülce Cakmak, Marcella Silva de Paula, Çiğdem Kahveci, Burak Yilmaz, Mustafa Borga Dönmez   +6 more
wiley   +1 more source

Effect of resin type, cleaning solution, and aging on the mechanical properties and reliability of additively manufactured occlusal devices

Journal of Prosthodontics, EarlyView.
Abstract Purpose The purpose of this in vitro study was to investigate the effect of alcohol‐free cleaning solutions on the mechanical properties and reliability of additively manufactured occlusal device resins, compared with isopropyl alcohol (IPA), while considering the influence of aging.
Selim Polat, Ayyüce Nur Tezcan, Hanan Al‐Johani, Gülce Çakmak, Mustafa Borga Dönmez, Burak Yilmaz   +5 more
wiley   +1 more source

Effects of printing temperature and post‐curing duration on the dimensional reproducibility and fracture load of 3D‐printed dental prostheses: An exploratory study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This in vitro study aimed to evaluate the effects of printing temperature and post‐curing duration on the dimensional reproducibility and mechanical properties of three‐dimensional (3D)–printed dental prostheses. Materials and Methods Photopolymer specimens were fabricated using a stereolithographic 3D printer at two temperatures: room
Ji‐Min Lee, KeunBaDa Son, Kyu‐Bok Lee   +2 more
wiley   +1 more source

Do the printing orientation angle and layer thickness influence the radiopacity of 3D‐printed dental resins?

Journal of Prosthodontics, EarlyView.
Abstract Purpose This in vitro study aimed to evaluate the effect of layer thickness, printing orientation angle, and resin type on the radiopacity of 3D‐printed dental resins. Materials and Methods Three dental 3D‐printed resins (VarseoSmile TriniQ, Crowntec, and Primeprint Temp) were investigated using two‐layer thicknesses (50 and 100 µm) and three ...
Goktug Yersel, Mukerrem Elif Ucan, Neslihan Tekce   +2 more
wiley   +1 more source

Comparison of surface treatment protocols for a 3D‐printable resin for definitive crowns: Effects on surface roughness and bonding performance

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to compare the effects of surface treatment protocols on the surface roughness and shear bond strength (SBS) of a three‐dimensional (3D)‐printable resin for definitive crowns. Materials and Methods A 3D‐printable resin for definitive crowns (Saremco Print Crowntec) was used to produce 168 specimens (10 × 10 × 2 mm3 ...
Engin Sacu, Mehmet Can Ararat, Sinan Fidan, Satılmış Ürgün, Mustafa Özgür Bora, Neslihan Tekce   +5 more
wiley   +1 more source

Fluid ingress and surface wettability of 3D‐printed closed‐hollow obturator specimens across material types and printing orientations

Journal of Prosthodontics, EarlyView.
Abstract Purpose To evaluate the effects of material type, printing orientation, and thermocycling on cumulative fluid ingress in three‐dimensional (3D)‐printed closed‐hollow obturator specimens and to compare water contact angle among material–printing orientation groups.
Wisarut Prawatvatchara, Soranun Chantarangsu, Somphote Angkanawiriyarak, Raiwint Khunwisetkul, Kwanwong Boonpitak, Visaluk Punyawattananon, Cheewin Towithelertkul   +6 more
wiley   +1 more source

Effect of access‐opening closure materials on fluid‐related mass gain and volumetric change in three‐dimensionally printed closed‐hollow obturator specimens

Journal of Prosthodontics, EarlyView.
Abstract Purpose To investigate how denture base resin and access‐opening closure material affect fluid‐related mass gain and micro‐computed tomography‐derived volumetric changes in three‐dimensionally printed closed‐hollow obturator specimens. Materials and Methods Specimens were printed from NextDent Denture 3D+ or Apex Base resin.
Wisarut Prawatvatchara, Soranun Chantarangsu, Raiwint Khunwisetkul, Visaluk Punyawattananon, Cheewin Towithelertkul, Murali Srinivasan, Dusit Nantanapiboon   +6 more
wiley   +1 more source