Results 51 to 60 of about 11,164 (255)

Strain-induced crystallization behavior and tensile properties of natural rubber with different vulcanization bond types

open access: yesPolymer Testing, 2023
The crosslinking network structure is a crucial factor influencing the properties of natural rubber. Therefore, investigating the impact of different vulcanization bond types on the strain-induced crystallization behavior and properties of natural rubber
Yueqiong Wang   +8 more
doaj   +1 more source

Studies in the Vulcanization of Rubber. IV—A Theory of Vulcanization of Rubber

open access: yes, 1930
A new theory has been advanced which, it is believed, explains completely the various phenomena connected with the vulcanization of rubber. It is entirely a chemical theory based on the existence of two separate and distinct rubber compounds, soft ...
G. R. Boggs, J. T. Blake
core   +1 more source

Mechanical Properties and Thermo‐Oxidative Aging of Hybrid EPDM Formulations With Bio‐Based Oils

open access: yesJournal of Applied Polymer Science, EarlyView.
This study evaluates bio‐based oil as an eco‐friendly replacement for paraffinic oil in EPDM rubber. While pure bio‐oil matches conventional mechanical properties, specific blends (25% and 75%) improve tensile strength and stiffness. The 50% blend requires tempering to optimize its sulfur network and morphology, eventually yielding a 35% strength ...
D. Šimić   +4 more
wiley   +1 more source

"Simulation of injection-molding vulcanization process of thick-walled rubber products"

open access: yesHecheng xiangjiao gongye
Based on the secondarily developed Fluent software, a novel vulcanization kinetic model and a multiphase flow model were used to perform numerical simulation and analysis of the three stages in the injection-molding vulcanization process of neoprene ...
"WANG Shilin1, ZHANG Peng1, WEI Xingyue1, ZHU Jiawei1, WANG Zexin1, JIAN Ranran1,2, ZENG Xiankui1, BAI Yang1"
doaj   +1 more source

Fluid Bed Vulcanization

open access: yes, 1963
This paper describes the use of fluidized solid particles as heating medium for rubber vulcanization, with emphasis on the continuous vulcanization of unsupported extrusions. The relevant features of fluid beds for this purpose—density, pressure and flow
R. C. W. Moakes   +4 more
core   +1 more source

Zn/Al‐NO3 Layered Double Hydroxide as Alternative Activator for Nitrile Rubber Vulcanization: Effect of the Accelerator‐to‐Sulfur Ratio on Curing Kinetics and Network Properties

open access: yesJournal of Applied Polymer Science, EarlyView.
Zn/Al‐NO3 layered double hydroxide offers a low‐zinc alternative for sulfur vulcanization of nitrile rubber, reducing nominal zinc loading by an estimated 71%. Its potential as a vulcanization activator depends on the curing system: conventional curing preserves tensile strength despite slower kinetics, whereas efficient curing maintains comparable ...
Lucas Castro Roza de Faria   +8 more
wiley   +1 more source

Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs) [PDF]

open access: yesMaterials Research, 2018
Elastomer thermoplastics are a class of polymeric materials that received industry attention due to the possibility of joining the elastic of elastomers with the thermoplastics processability.
Anna Paula Azevedo de Carvalho   +4 more
doaj   +2 more sources

Metal Oxides in Tetramethylthiuram Disulfide Vulcanization

open access: yes, 1960
Rubber is usually vulcanized with the aid of the so-called activators, metal oxides, zinc oxide being the one most often used. In vulcanization in the presence of MBT (mercaptobenzothiazole) or DPG (diphenylguanidine) as accelerators it was found that ...
V. A. Shershnev, B. A. Dogadkin
core   +1 more source

A Microfluidic TFF Device for Biopharmaceutical Process Development: Scale‐Down Verification of Ultrafiltration and Diafiltration Modes for Monoclonal Antibodies

open access: yesBiotechnology and Bioengineering, EarlyView.
ABSTRACT Tangential flow filtration (TFF) is an essential operation in downstream bioprocessing, yet conventional scale‐down models require large material volumes and often fail to capture scale‐relevant hydrodynamics. A microfluidic TFF (µTFF) platform was developed that preserves wall shear rate and transmembrane pressure, enabling low‐volume ...
Nusrat Jahan   +3 more
wiley   +1 more source

Structural evolution during inverse vulcanization

open access: yesNature Communications
Inverse vulcanization exploits S8 to synthesize polysulfides. However, evolution of products and its mechanism during inverse vulcanization remains elusive.
Botuo Zheng   +7 more
doaj   +1 more source

Home - About - Disclaimer - Privacy