Results 11 to 20 of about 158 (154)
Metals, 2021 To apply the duplex type low-carbon medium-manganese steel to the hot/warm-forging and -stamping products, the influence of cooling process routes immediately after intercritical annealing such as air-cooling (AC) and isothermal transformation (IT ...
Koh-ichi Sugimoto, Hikaru Tanino
doaj +1 more source
Analysis and Process Improvement of Mixed Crystal in Warm Forged 20CrH Inner Star Wheel
Teshugang, 2023 The 20CrH special steel bar produced by a special steel factory,after warm forging to make inner star wheel by the downstream user,the mixed crystal phenomenon was found after carburizing heat treatment at 9655 ℃×6 h.Using light microscope observation ...
徐乐钱 +4 more
doaj
Metals, 2019 A process comprising a hot extrusion process and a warm forging process was designed to form an umbrella-shaped aluminum structural component with a high degree of difficulty for the plastic forming method. A circular cylindrical part was extruded with a
Chul Kyu Jin
doaj +1 more source
Journal of Materials Research and Technology, 2022 To improve the ambient strength and high temperature ductility, a novel Al-3.25Mg-0.37Zr-0.28Mn-0.19Y (wt.%) alloy has been fabricated by multidirectional forging and warm rolling.
Furong Cao +6 more
doaj +1 more source
Improvement Of Tools Durability By Application Of Hybrid Layer Of Nitrided/PECVD Coating.
Archives of Metallurgy and Materials, 2015 In the process of die hot forging the tools are subjected to three main factors leading to their destruction: the intensive thermal shocks, cyclically variable mechanical loads and intensive friction.
Gronostajski Z. +4 more
doaj +1 more source
Metals, 2023 In this work, the technique of equal-channel angular pressing (ECAP) that enables producing bulk billets was used to form a UFG structure in Ti-6Al-4V alloy. A subsequent warm upsetting simulates die forging and the production of a part.
Iuliia M. Modina +4 more
doaj +1 more source
Analysis of the Bimetallic Joint of a Hot-Forged Crosshead Composed of ASTM B221 6060 Aluminum and AWS A5.36 E110C-G M Low Alloy Steel Obtained by Localized Fusion Additive Manufacturing [PDF]
Materials ResearchIn this study, the development of a bimetallic crosshead produced by additive manufacturing (AM) is discussed, evaluating the joint region between the two metals.
Joélson Vieira da Silva +5 more
doaj +1 more source
Effect of Processing Conditions on Forgeability and Properties of Hot and Warm-Forged Steel 300M
Archives of Metallurgy and Materials, 2017 Results of investigation of the effect of processing conditions of medium-carbon alloy steel AISI 300M on forgeability and microstructure-properties are presented here, including as-forged and heat treated condition of the material. The presented results
Skubisz P., Łukaszek-Sołek A.
doaj +1 more source
Development of Warm Forging Method for Magnesium Alloy
MATERIALS TRANSACTIONS, 2004 A new warm forging method for magnesium alloys is proposed by taking their material properties into consideration. Since the ductility of Mg alloys is low at room temperature, the forging operation is conducted in the temperature range of 200-400°C. In the warm forging of Mg alloys, the billet is easily cooled down in the die cavity before the onset of
Matsumoto, Ryo, Osakada, Kozo
openaire +2 more sources
Surface Defects on Forged Nut of Stainless Steel
MATEC Web of Conferences, 2016 Surface quality of nuts used in gas pipe joints is an important issue because the surface state affects the fatigue characteristics. Surface defects of nuts produced by warm forging from a stainless steel are observed and the cause of defect generation ...
Sasa Tomonori +2 more
doaj +1 more source