Results 31 to 40 of about 635 (184)
Crystals, 2019 The isothermal compression tests of the nickel-based superalloy Waspaloy were carried out under various temperatures from 1040 to 1120 °C and strain rates from 0.01 to 10 s−1 with the height reduction of 60% and the flow stress curves were obtained.
Haiping Wang +5 more
doaj +1 more source
Frequency Analysis of Transients in Electrochemical Noise of Superalloys Waspaloy and Ultimet
Metals, 2021 Nickel or Cobalt-based superalloys represent an important class of engineering materials, finding widespread application in critical components within the gas turbine engines used for jet propulsion and electricity generation.
Jesús Manuel Jáquez-Muñoz +9 more
doaj +1 more source
Superalloys 1980 (Fourth International Symposium), 1980 Nickel was systematically substituted for cobalt in Waspaloy. M'echanical test results indicate that lower cobalt has little effect on tensile properties, but adversely affects creep rate and stress rupture life. Phase extraction studies found slight decreases in gamma prime volume fractions and increased M'23C6 carbide with lowes cobalt.
J.A. Domingue, G.E. Maurer, L.A. Jackman
openaire +1 more source
Comparison of Creep Properties of Cast and Wrought Haynes 282 Superalloy
Advances in Materials Science and Engineering, Volume 2018, Issue 1, 2018., 2018 Ni‐based superalloy Haynes 282 was developed as a gas turbine material for use in the ultra‐supercritical (USC) stage of next‐generation coal‐fired power plants. Temperatures in the USC stage exceed 700°C during operation. Despite the important role of Haynes 282 in increasing the performance of high‐pressure turbines, as a result of its high ...
Young-Joo Kim +3 more
wiley +1 more source
Experimental and numerical analysis of roller burnishing of Waspaloy
Procedia Manufacturing, 2019 Abstract Nickel based superalloys, such as Waspaloy , are extensively used for applications under heavy environmental conditions due to their superior thermo-mechanical properties. However, manufacturing processes of these materials are challenging since they involve issues related to their poor workability.
Rinaldi S., Rotella G., Umbrello D.
openaire +3 more sources
, 2023 The evolution of microstructure and ductility has been investigated for Waspaloy after isothermal exposure between 5 and 1800s at 750–950 °C. Gamma prime (γ’) with 1.7 nm diameter is found in the mill-annealed condition, while precipitate-growth ...
Andersson, Joel, +3 more
core +1 more source
Modification of creep and low cycle fatigue behaviour induced by welding [PDF]
Fracture and Structural Integrity, 2014 In this work, the mechanical properties of Waspaloy superalloy have been evaluated in case of welded repaired material and compared to base material. Test program considered flat specimens on base and TIG welded material subjected to static, low-cycle ...
A. Carofalo +6 more
doaj +2 more sources
MATEC Web of Conferences, 2018 In this paper, the influence of laser assisted turning of hard-to-cut nickel-based superalloy on tool cutting ability was presented. The conducted research involved the machining performance along with tool life of ceramic inserts during turning of heat ...
Wiciak Martyna +2 more
doaj +1 more source
Microstructure Modeling of Forged Waspaloy Disks
Superalloys 1996 (Eighth International Symposium), 1996 An effort has been undertaken to develop, validate and refine a modeling tool for the prediction of forged Waspaloy microstructures. Previous work on steel materials [l] has shown that microstructural modeling is possible and can be readily accomplished through use of metallurgically-based mathematical equations.
G. Shen, J. Rollins, D. Furrer
openaire +1 more source
Solidification of alloy 718, ati 718Plus® and waspaloy
, 2014 Alloy 718, ATI 718Plus® and Waspaloy have been investigated in terms of what their respective solidification process reveals. Differential thermal analysis was used to approach the task together with secondary electron and back scattered electron ...
J. Andersson +19 more
core +1 more source