Results 61 to 70 of about 6,878 (277)

Prediction of the Height of Fractured Water-Conducting Zone Using Swarm Intelligence Optimization Algorithms

, 2023
Abstract The calculation of the height of fractured water-conducting zone (FWCZ) is of great significance for mine optimization design, water disaster prevention and safety production of the coal mines. In this paper, a height-prediction model of FWCZ based on extreme learning machine (ELM) is proposed.
Dekang Zhao, Zhenghao Li, Guorui Feng, Fulong Wang, Chenwei Hao, Yaming He, Shuning Dong   +6 more
openaire   +1 more source

Prediction of coal mine roof water damage based on micro-seismic monitoring technology

Meikuang Anquan, 2023
Taking 307 working face of Tingnan Coal Mine as the engineering background, in order to verify the reliability of real-time monitoring of water flowing fractured zone height by micro-seismic monitoring data, the mechanical numerical simulation software ...
LIAN Huiqing, YANG Yi, YANG Songlin, TANG Zhongyi, XU Bin, PEI Wenxian, WANG Rui, LI Qixing
doaj   +1 more source

Direct Metal Deposition of Graphene–Ti28Nb35.4Zr Matrix Composites With Enhanced Mechanical, Corrosion, and Biocompatibility Properties for Bone Implants

Advanced Engineering Materials, EarlyView.
Graphene nanoplatelet (0.1 wt.%) reinforcement significantly enhances the performance of β Ti‐28Nb‐35.4Zr alloy. Grain refinement, reduced water contact angle, and improved surface characteristics promote osteoblast adhesion and complete surface coverage after 7 days.
Khurram Munir, Jixing Lin, Yuncang Li, Li Zhu, Paul F. A. Wright, Cuie Wen   +5 more
wiley   +1 more source

In Situ Micromechanical Study of Bimodal γ′–γ″ Precipitate Assemblies in Ni–Cr–Al–Nb Superalloy

Advanced Engineering Materials, EarlyView.
A Ni–Cr–Al–Nb superalloy with a bimodal γ′–γ″ precipitate distribution is developed. Composite precipitate assemblies form through heterogeneous nucleation, effectively impeding dislocation motion. Micropillar compression reveals high strength at room and elevated temperatures, governed by precipitate shearing, with coupled faulting mechanisms ...
Ujjval Bansal, Tae‐Hyeok Kang, Pyuck‐Pa Choi, Subin Lee, Christoph Kirchlechner   +4 more
wiley   +1 more source

Characterisation of the 2D and 3D density and connectivity attributes of fracture systems in carbonate reservoir analogues: implications for fluid flow [PDF]

, 2013
Fault zones, hosted in fractured carbonate reservoirs, can behave as either high porosity and permeability conduits, favoring the migration of fluids; or, conversely, as low porosity and permeability barriers, retarding fluid flow, due to the presence of
Sagi, David Adam, SAGI, DAVID,ADAM
core  

Electrochemical Behavior of Flame‐Sprayed Sc‐Doped AlCoCrFeMo High‐Entropy Alloy Coatings in 3.5% Sodium Chloride Solution

Advanced Engineering Materials, EarlyView.
Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar, Akash Vyas, Mohammad Aatif Qazi, Nashit Jalal, Maria Ophelia Jarligo, Mostafa Yakout, Jing Liu, André McDonald   +7 more
wiley   +1 more source

Risk Identification Method and Application of Roof Water Inrush Under Multi-Working Face Mining

Applied Sciences
Adjacent, multi-working face mining can expand the range of disturbed overburden, increasing the risk of triggering roof water inrush, which threatens the safe operation of coal mines. In this paper, we propose a risk identification method for roof water
Zhendi Huang, Kun Wang, Xuesheng Liu, Yongqiang Zhao, Xuebin Li, Biao Fu, Yu Zhou   +6 more
doaj   +1 more source

Nondestructive Testing of Welded Composite Metal Foams

Advanced Engineering Materials, EarlyView.
X‐ray computed tomography (CT) is used to evaluate welded steel–steel composite metal foam (CMF) joints of two density classes. It reports variation in postweld spatial void distribution and correlates it to weld‐induced changes, mechanical performance, and failure within welded CMF panels.
Chinmaya Prerana Inguva, Aman Kaushik, Afsaneh Rabiei   +2 more
wiley   +1 more source

Influence of Surface Finish on the Tribological Performance of AlTiBN Coatings Deposited on Forming Tools

Advanced Engineering Materials, EarlyView.
Aluminum and nitride coatings are used in industry because they are hard, resist wear, and protect against oxidation. Adding boron can improve friction behavior and other properties. This study tests coatings on surfaces with different finishes. Results show smoother surfaces perform better, while rough ones wear faster, although coatings can reduce ...
Adrián Claver, Iker Alfonso, Eneko Barba, Javier León, José Antonio García, Iñaki Zalakain, Iván Fernández Martínez, Arley García‐Carrero, Christian Almeyda, Daniel Salcedo   +9 more
wiley   +1 more source

Study on the “Two-Zone” Heights in Lower Slice Mining Under Thick Alluvium and Thin Bedrock

Applied Sciences
The extraction of thin bedrock coal seams with thick alluvium poses a challenging issue in the realm of coal safety production in China. Especially for mining under aquifers, knowing the development height of water-conducting fracture zones above the ...
Xiaowei Lu, Jingyu Jiang, Wen Wang, Haibo Cao   +3 more
doaj   +1 more source