Results 31 to 40 of about 20,695 (279)

Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding

open access: yesAdvanced Engineering Materials, EarlyView.
This study investigates the tribological response of 60NiTi alloy under dry, water‐lubricated and high‐temperature conditions. The alloy exhibits decreasing wear volume and friction with increasing temperature due to the formation of protective oxide layers. The work clarifies dominant wear mechanisms and demonstrates the suitability of 60NiTi for high‐
Anthony Onyebuchi Okoani   +2 more
wiley   +1 more source

Electrical Conductivities of Conductors, Semiconductors, and Their Mixtures at Elevated Temperatures

open access: yesAdvanced Engineering Materials, EarlyView.
This article presents a comprehensive review of temperature‐dependent electrical conductivity data for multiple material classes at elevated temperatures, highlighting a persistent conductivity gap between metals and semiconductors in the range of 102$\left(10\right)^{2}$– 107$\left(10\right)^{7}$ S/m. Metal–ceramic irregular metamaterials are proposed
Valentina Torres Nieto, Marcia A. Cooper
wiley   +1 more source

Overnight weight loss: relationship with sleep structure and heart rate variability [PDF]

open access: yes, 2008
Background: Weight loss can be caused by a loss of body mass due to metabolism and by water loss as unsensible water loss, sweating, or excretion in feces and urine.
Adriana Rueda   +6 more
core   +1 more source

Laser‐Induced Graphene from Waste Almond Shells

open access: yesAdvanced Functional Materials, EarlyView.
Almond shells, an abundant agricultural by‐product, are repurposed to create a fully bioderived almond shell/chitosan composite (ASC) degradable in soil. ASC is converted into laser‐induced graphene (LIG) by laser scribing and proposed as a substrate for transient electronics.
Yulia Steksova   +9 more
wiley   +1 more source

A retrospective study on 16 collodion babies

open access: yesThe Turkish Journal of Pediatrics, 1997
Sixteen collodion babies followed in the Neonatal Care Unit between January 1982 and December 1994 were evaluated retrospectively. The preterm/term ratio was 1.6, and complete shedding of the collodion membrane took an average of 21.9 days (range ...
A Oztürk   +3 more
doaj  

Tuning the Dielectric Properties of Individual Clay Nanosheets by Interlayer Composition: Toward Nano‐Electret Materials

open access: yesAdvanced Functional Materials, EarlyView.
The dielectric properties of clays are studied on the level of individual monolayers and functional double stacks. The material breakdown characteristics and charge storage performance are analyzed. For illustration, a defined charge pattern representing a cuneiform character is produced, written into a microscopic clay tile, referencing the origins of
Sebastian Gödrich   +6 more
wiley   +1 more source

Fast‐Responding O2 Gas Sensor Based on Luminescent Europium Metal‐Organic Frameworks (MOF‐76)

open access: yesAdvanced Functional Materials, EarlyView.
Luminescent MOF‐76 materials based on Eu(III) and mixed Eu(III)/Y(III) show rapid and reversible changes in emission intensity in response to O2 with very short response times. The effect is based on triplet quenching of the linker ligands that act as photosensitizers. Average emission lifetimes of a few milliseconds turn out to be mostly unaffected by
Zhenyu Zhao   +5 more
wiley   +1 more source

Reducing Open‐Circuit Voltage Losses in Wide‐Bandgap FAPbBr3 Perovskite Solar Cells for Continuous Unassisted Light‐Driven Water Splitting

open access: yesAdvanced Functional Materials, EarlyView.
The combination of formamidinium thiocyanate and 1,3‐propane diammonium iodide for bulk and top‐surface passivation, and a ternary fullerene blend to improve energy band alignment, suppresses energy losses in wide‐bandgap FAPbBr3 perovskite solar cells.
Laura Bellini   +9 more
wiley   +1 more source

Three‐dimensional Antimony Sulfide Based Flat Optics

open access: yesAdvanced Functional Materials, EarlyView.
This work presents the development of a grayscale electron beam lithography (g‐EBL) method for fabricating antimony trisulfide (Sb2S3) nanostructures with customizable 3D profiles. The refractive index of g‐EBL patterned Sb2S3 is determined based on the synergy of genetic algorithm and transfer matrix method.
Wei Wang   +18 more
wiley   +1 more source

Use of an electrical resistance hygrometer to measure human sweat rates [PDF]

open access: yes
The application of the resistance hygrometer as a tool to measure the localized sweat rate from the human body in both the active and passive sweat regions was studied.
Suga, T.
core   +1 more source

Home - About - Disclaimer - Privacy