Results 11 to 20 of about 735 (153)
Development of a Low-Cost Infrared Imaging System for Real-Time Analysis and Machine Learning-Based Monitoring of GMAW [PDF]
SensorsThis research presents a novel, low-cost optical acquisition system based on infrared imaging for real-time weld bead geometry monitoring in Gas Metal Arc Welding (GMAW).
Jairo José Muñoz Chávez +5 more
doaj +2 more sources
Fracture and Structural Integrity, 2022 Gas tungsten arc welding (GTAW) is an important in manufacturing industries where it is significant to control the mechanical and metallurgical characteristics and its weld bead geometry.
H. S. Patil, D. C. Patel
doaj +1 more source
Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [PDF]
Journal of Applied and Computational Mechanics, 2020 Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high ...
Abolfazl Foorginejad +3 more
doaj +1 more source
Automatic Control of the Weld Bead Geometry
, 2021 Automatic control of the welding process is complex due to its nonlinear and stochastic behavior and the difficulty for measuring the principal magnitudes and closing the control loop. Fusion welds involve melting and subsequent solidification of one or more materials.
Guillermo Alvarez Bestard +1 more
openaire +2 more sources
Journal of the Mechanical Behavior of Materials, 2021 Submerged arc welding (SAW) has been performed using slag-fresh flux mixture on duplex stainless steel plates. Experiments were performed by recycled slag-fresh flux mixtures with iron powder; iron powder is mixed to maintain and enhance the weld ...
Jindal Sandeep, Singh Harpreet
doaj +1 more source
A Study on Process Characteristics and Performance of Hot Wire Gas Tungsten Arc Welding Process for High Temperature Materials [PDF]
Materials Research, 2016 Hot wire gas tungsten arc welding (HW-GTAW) process is the one where the filler wire is pre-heated close to its melting point before it is fed in to the arc.
Anantha Padmanaban MR +2 more
doaj +1 more source
Prediction and Optimization of Weld Bead Geometry
International Journal of Innovative Technology and Exploring Engineering, 2019 Bead geometry plays very important role in predicting the quality of weld as cooling rate of the weld depends on the height and bead width, also bead geometry determines it’s residual stresses and distortion. Weld bead geometries are outcomes of several welding parameters taken into consideration. If arc travel is high and arc power is kept low it will
Jigesh Yadav, Mani Kant Paswan
openaire +1 more source
Análise da influência dos parâmetros de soldagem no processo a arco submerso
Revista Principia, 2020 This work aimed to analyze the influence of welding parameters on weld bead geometry when applied to the submerged arc process. Specifically, the project carried out: the construction of a welding torch support and flow reservoir, as well as the analysis
Marília Aires Bezerra +4 more
doaj +1 more source
Defence Technology, 2018 The weld quality is significantly affected by the weld parameters (arc voltage, welding current, nozzle to plate distance and welding speed) in the submerged arc welding (SAW). Bead-on-plate welds were performed on stainless steel plates by automated SAW
Ajitanshu Vedrtnam +2 more
doaj +1 more source
Metals, 2023 A quantitative and qualitative study of the effect of laser (light amplification by stimulated emissions of radiation) welding parameters, such as focus point, welding speed, power beam and shield gas on bead profile in relation with microchemistry ...
Kamel Touileb +7 more
doaj +1 more source